BGC > Product Search > Acrylamide

Appearance	White crystal
Content (%)	≥ 98
Moisture (%)	≤ 1
Fe (PPM)	≤ 1
Cu (%)	0
Color (Hazen) 20% Solution	≤ 20
Water insolubles (%)	≤ 0.005%
Inhibitor(PPM)	≤ 10
Conductivity(us/cm)	≤ 20
PH (PH Meter)	6-7

Appearance	White crystal
Content (%)	≥ 98
Moisture (%)	≤ 1
Fe (PPM)	≤ 1
Cu (%)	0
Color (Hazen) 20% Solution	≤ 20
Water insolubles (%)	≤ 0.005%
Inhibitor(PPM)	≤ 10
Conductivity(us/cm)	≤ 20
PH (PH Meter)	6-7

Product Name: Acrylamide
Synonyms: ACRYLAMIDE ;
ACRYLAMIDE 4K;ACRYLAMIDE;
ACRYLAMIDE;
ACRYLAMIDE MONOMER;
ACRYLIC ACID AMIDE;
ACRYLAMIDE

Product Categories: Industrial/Fine Chemicals;
Acrylamide;Reagents for Electrophoresis;Biochemistry;
Water Ttreatment Chemicals;AcrylamidesGlycobiology;
Electrophoresis of Glycans;Glycan Labeling and Analysis;
Protein Electrophoresis;SDS-PAGE;Biochemicals;
Molecular Biology;Molecular Biology Reagents;
Aliphatics;Amines;Electrophoresis Materials

Acrylamide Chemical Properties
mp 82-86 °C(lit.)
bp 125 °C25 mm Hg(lit.)
density 1,322 g/cm3
vapor density 2.45 (vs air)
vapor pressure 0.03 mm Hg ( 40 °C)
refractive index 1.460
Fp 138 °C
storage temp. 2-8°C
solubility H2O: 50 mg/mL at 20 °C, clear, colorless
form powder

Water Solubility SOLUBLE, 216 g/100 mL
Sensitive Light Sensitive Merck 14,129
BRN 605349
Stability: Unstable. Do not heat above 50C. Explosive. Incompatible with acids, bases, oxidizing agents, reducing agents, iron and iron salts, copper, aluminium, brass, free radical initiators. Air sensitive. Hygroscopic.

Chemical Properties White crystals
General Description A solution of a colorless crystalline solid. Flash point depends on the solvent but below 141°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used for sewage and waste treatment, to make dyes and adhesives.

Product Name: Acrylamide
Synonyms: ACRYLAMIDE ;
ACRYLAMIDE 4K;ACRYLAMIDE;
ACRYLAMIDE;
ACRYLAMIDE MONOMER;
ACRYLIC ACID AMIDE;
ACRYLAMIDE

Product Categories: Industrial/Fine Chemicals;
Acrylamide;Reagents for Electrophoresis;Biochemistry;
Water Ttreatment Chemicals;AcrylamidesGlycobiology;
Electrophoresis of Glycans;Glycan Labeling and Analysis;
Protein Electrophoresis;SDS-PAGE;Biochemicals;
Molecular Biology;Molecular Biology Reagents;
Aliphatics;Amines;Electrophoresis Materials

Acrylamide Chemical Properties
mp 82-86 °C(lit.)
bp 125 °C25 mm Hg(lit.)
density 1,322 g/cm3
vapor density 2.45 (vs air)
vapor pressure 0.03 mm Hg ( 40 °C)
refractive index 1.460
Fp 138 °C
storage temp. 2-8°C
solubility H2O: 50 mg/mL at 20 °C, clear, colorless
form powder

Water Solubility SOLUBLE, 216 g/100 mL
Sensitive Light Sensitive Merck 14,129
BRN 605349
Stability: Unstable. Do not heat above 50C. Explosive. Incompatible with acids, bases, oxidizing agents, reducing agents, iron and iron salts, copper, aluminium, brass, free radical initiators. Air sensitive. Hygroscopic.

Chemical Properties White crystals
General Description A solution of a colorless crystalline solid. Flash point depends on the solvent but below 141°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used for sewage and waste treatment, to make dyes and adhesives.

Product Name: Acrylamide
Synonyms: ACRYLAMIDE ;
ACRYLAMIDE 4K;ACRYLAMIDE;
ACRYLAMIDE;
ACRYLAMIDE MONOMER;
ACRYLIC ACID AMIDE;
ACRYLAMIDE

Product Categories: Industrial/Fine Chemicals;
Acrylamide;Reagents for Electrophoresis;Biochemistry;
Water Ttreatment Chemicals;AcrylamidesGlycobiology;
Electrophoresis of Glycans;Glycan Labeling and Analysis;
Protein Electrophoresis;SDS-PAGE;Biochemicals;
Molecular Biology;Molecular Biology Reagents;
Aliphatics;Amines;Electrophoresis Materials

Acrylamide Chemical Properties
mp 82-86 °C(lit.)
bp 125 °C25 mm Hg(lit.)
density 1,322 g/cm3
vapor density 2.45 (vs air)
vapor pressure 0.03 mm Hg ( 40 °C)
refractive index 1.460
Fp 138 °C
storage temp. 2-8°C
solubility H2O: 50 mg/mL at 20 °C, clear, colorless
form powder

Water Solubility SOLUBLE, 216 g/100 mL
Sensitive Light Sensitive Merck 14,129
BRN 605349
Stability: Unstable. Do not heat above 50C. Explosive. Incompatible with acids, bases, oxidizing agents, reducing agents, iron and iron salts, copper, aluminium, brass, free radical initiators. Air sensitive. Hygroscopic.

Chemical Properties White crystals
General Description A solution of a colorless crystalline solid. Flash point depends on the solvent but below 141°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used for sewage and waste treatment, to make dyes and adhesives.

Product Name: Acrylamide
Synonyms: ACRYLAMIDE ;
ACRYLAMIDE 4K;ACRYLAMIDE;
ACRYLAMIDE;
ACRYLAMIDE MONOMER;
ACRYLIC ACID AMIDE;
ACRYLAMIDE

Product Categories: Industrial/Fine Chemicals;
Acrylamide;Reagents for Electrophoresis;Biochemistry;
Water Ttreatment Chemicals;AcrylamidesGlycobiology;
Electrophoresis of Glycans;Glycan Labeling and Analysis;
Protein Electrophoresis;SDS-PAGE;Biochemicals;
Molecular Biology;Molecular Biology Reagents;
Aliphatics;Amines;Electrophoresis Materials

Acrylamide Chemical Properties
mp 82-86 °C(lit.)
bp 125 °C25 mm Hg(lit.)
density 1,322 g/cm3
vapor density 2.45 (vs air)
vapor pressure 0.03 mm Hg ( 40 °C)
refractive index 1.460
Fp 138 °C
storage temp. 2-8°C
solubility H2O: 50 mg/mL at 20 °C, clear, colorless
form powder

Water Solubility SOLUBLE, 216 g/100 mL
Sensitive Light Sensitive Merck 14,129
BRN 605349
Stability: Unstable. Do not heat above 50C. Explosive. Incompatible with acids, bases, oxidizing agents, reducing agents, iron and iron salts, copper, aluminium, brass, free radical initiators. Air sensitive. Hygroscopic.

Chemical Properties White crystals
General Description A solution of a colorless crystalline solid. Flash point depends on the solvent but below 141°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used for sewage and waste treatment, to make dyes and adhesives.

Molecular Formula: C3H5NO
Molecular Weight: 71.08
Hazard Symbols: T
UN Number: UN 3426 6.1/PG 3
WGKGermany: 3
PackingGroup: III
HS Code: 29241900

Molecular Formula: C3H5NO
Molecular Weight: 71.08
Hazard Symbols: T
UN Number: UN 3426 6.1/PG 3
WGKGermany: 3
PackingGroup: III
HS Code: 29241900

Molecular Formula: C3H5NO
Molecular Weight: 71.08
Hazard Symbols: T
UN Number: UN 3426 6.1/PG 3
WGKGermany: 3
PackingGroup: III
HS Code: 29241900

Molecular Formula: C3H5NO
Molecular Weight: 71.08
Hazard Symbols: T
UN Number: UN 3426 6.1/PG 3
WGKGermany: 3
PackingGroup: III
HS Code: 29241900

Molecular Formula: C3H5NO
Molecular Weight: 71.08
Hazard Symbols: T
UN Number: UN 3426 6.1/PG 3
WGKGermany: 3
PackingGroup: III
HS Code: 29241900

Appearance White crystal

Assay ≥ 98.00%

Moisture ≤ 1.00%

Chromaticity ≤ 15

Fe ≤ 1x10-4 %

Inhibitor ≤ 10x10-4 %

Electric conductivity ≤ 15 us/cm

PH value 7 ~ 8

Acrylonitrile ≤ 5x10-4 %

Acrylic acid ≤ 10x10-4 %

Appearance: White crystal
Content (%): ≥ 98
Moisture (%): ≤ 1
Fe (PPM): ≤ 1
Cu (%): 0
Color (Hazen) 20% Solution: ≤ 20
Water insolubles (%): ≤ 0.005%
Inhibitor(PPM): ≤ 10
Conductivity(us/cm): ≤ 20
PH (PH Meter): 6-7
Package: 25kg/bag

Appearance: White crystal
Content (%): ≥ 98
Moisture (%): ≤ 1
Fe (PPM): ≤ 1
Cu (%): 0
Color (Hazen) 20% Solution: ≤ 20
Water insolubles (%): ≤ 0.005%
Inhibitor(PPM): ≤ 10
Conductivity(us/cm): ≤ 20
PH (PH Meter): 6-7
Package: 25kg/bag

Appearance: White crystal
Content (%): ≥ 98
Moisture (%): ≤ 1
Fe (PPM): ≤ 1
Cu (%): 0
Color (Hazen) 20% Solution: ≤ 20
Water insolubles (%): ≤ 0.005%
Inhibitor(PPM): ≤ 10
Conductivity(us/cm): ≤ 20
PH (PH Meter): 6-7
Package: 25kg/bag

Appearance: White crystal
Content (%): ≥ 98
Moisture (%): ≤ 1
Fe (PPM): ≤ 1
Cu (%): 0
Color (Hazen) 20% Solution: ≤ 20
Water insolubles (%): ≤ 0.005%
Inhibitor(PPM): ≤ 10
Conductivity(us/cm): ≤ 20
PH (PH Meter): 6-7
Package: 25kg/bag

Appearance: White crystal
Content (%): ≥ 98
Moisture (%): ≤ 1
Fe (PPM): ≤ 1
Cu (%): 0
Color (Hazen) 20% Solution: ≤ 20
Water insolubles (%): ≤ 0.005%
Inhibitor(PPM): ≤ 10
Conductivity(us/cm): ≤ 20
PH (PH Meter): 6-7
Package: 25kg/bag

Appearance: White crystal
Content (%): ≥ 98
Moisture (%): ≤ 1
Fe (PPM): ≤ 1
Cu (%): 0
Color (Hazen) 20% Solution: ≤ 20
Water insolubles (%): ≤ 0.005%
Inhibitor(PPM): ≤ 10
Conductivity(us/cm): ≤ 20
PH (PH Meter): 6-7
Package: 25kg/bag

Appearance: White crystal
Content (%): ≥ 98
Moisture (%): ≤ 1
Fe (PPM): ≤ 1
Cu (%): 0
Color (Hazen) 20% Solution: ≤ 20
Water insolubles (%): ≤ 0.005%
Inhibitor(PPM): ≤ 10
Conductivity(us/cm): ≤ 20
PH (PH Meter): 6-7
Package: 25kg/bag

Appearance: White crystal
Content (%): ≥ 98
Moisture (%): ≤ 1
Fe (PPM): ≤ 1
Cu (%): 0
Color (Hazen) 20% Solution: ≤ 20
Water insolubles (%): ≤ 0.005%
Inhibitor(PPM): ≤ 10
Conductivity(us/cm): ≤ 20
PH (PH Meter): 6-7
Package: 25kg/bag

Appearance: White crystal
Content (%): ≥ 98
Moisture (%): ≤ 1
Fe (PPM): ≤ 1
Cu (%): 0
Color (Hazen) 20% Solution: ≤ 20
Water insolubles (%): ≤ 0.005%
Inhibitor(PPM): ≤ 10
Conductivity(us/cm): ≤ 20
PH (PH Meter): 6-7
Package: 25kg/bag

Appearance: White crystal
Content (%): ≥ 98
Moisture (%): ≤ 1
Fe (PPM): ≤ 1
Cu (%): 0
Color (Hazen) 20% Solution: ≤ 20
Water insolubles (%): ≤ 0.005%
Inhibitor(PPM): ≤ 10
Conductivity(us/cm): ≤ 20
PH (PH Meter): 6-7
Package: 25kg/bag