|
|
|
|
Suppliers for
Dioctyl adipate
|
Properties | | CAS |
103-23-1 | | Formula |
C22H42O4 | | EINECS |
203-090-1 |
|
|
8 Registered suppliers
| APHA # | ≤ 20
| | Ester % | ≥ 99.5
| | Loss on heat % | ≤ 0.3
| | Acid value mgKOH/g | ≤ 0.3
| | Flash point(open) °C | ≥ 185
| | Density (20°C)g/cm3 | 0.927±0.005 |
| APHA # | ≤ 20
| | Ester % | ≥ 99.5
| | Loss on heat % | ≤ 0.3
| | Acid value mgKOH/g | ≤ 0.3
| | Flash point(open) °C | ≥ 185
| | Density (20°C)g/cm3 | 0.927±0.005 |
| APHA # | ≤ 20
| | Ester % | ≥ 99.5
| | Loss on heat % | ≤ 0.3
| | Acid value mgKOH/g | ≤ 0.3
| | Flash point(open) °C | ≥ 185
| | Density (20°C)g/cm3 | 0.927±0.005 |
| APHA # | ≤ 20
| | Ester % | ≥ 99.5
| | Loss on heat % | ≤ 0.3
| | Acid value mgKOH/g | ≤ 0.3
| | Flash point(open) °C | ≥ 185
| | Density (20°C)g/cm3 | 0.927±0.005 |
| APHA # | ≤ 20
| | Ester % | ≥ 99.5
| | Loss on heat % | ≤ 0.3
| | Acid value mgKOH/g | ≤ 0.3
| | Flash point(open) °C | ≥ 185
| | Density (20°C)g/cm3 | 0.927±0.005 |
Product name: Dioctyl adipate/DOA
(2-ethylhexyl) adipate; Dioctyl adipate-2; 2-ethylhexyl dicarboxylic acid; Plastic adjuvant DOA; Dioctyl adipate; (2-ethylhexyl) adipate; di (2-ethylhexyl) adipate;
English name: Bis (2-ethylhexyl) adipate
Bis (2-ethylhexyl) hexanedioate hexanedioic acid bis (2-ethylhexyl) ester (Bis (2-ethylhexyl)) is a synergistic and nonionic surfactant,
CAS: 103-23-1
Molecular formula: C22H42O4
Molecular weight: 370.57
EINECS: 203-090-1
Melting point -67 ° C
The boiling point of 417 ° C
Density 0.925 g / mL at 20 ° C (lit.)
Refractive index n20 / D 1.447 (lit.)
Flash point> 230 ° F
Storage conditions 2-8 ° C
Water - solubility immiscible
BRN 1803774
Stable. Incompatible with oxidizing agents, water, nitrates.
CAS database 103-23-1 (CAS DataBase Reference)
Chemical properties: Colorless or slightly yellow oily liquid. The boiling point of 210 ° C (0.67kPa), 175 ° C (0.27kPa), 167 ℃ (0.130kPa), the relative density of 0.990 (20/4 ℃), the refractive index of 1.4470. A flash point of 193 ° C. Soluble in most organic solvents, slightly soluble in glycol, do not dissolve in water. A special smell.
Uses This product is an excellent cold plasticizer of PVC, giving products excellent low temperature flexibility, and has a certain light and heat stability and water resistance. In the plastisol, the initial viscosity is low, viscosity stability is good. Often used with DOP and other primary plasticizers and for cold-resistant agricultural films, wires, sheet, leather, outdoor water pipes and frozen food packaging film. Also can be used as many low-temperature synthetic rubber plasticizer and nitrocellulose, ethyl cellulose and other resin plasticizer. In the laboratory work for gas chromatography stationary phase. Di-2-ethylhexyl adipate is very toxic and has a lethal dose of about 500,000 mg / kg. The oral LD50 is 3000-6000 mg / kg in rats. The skin and eye irritation is also mild.
Use as a variety of resins, especially polyvinyl chloride and vinyl chloride copolymer cold plasticizer, can also be used as aviation grease raw materials
Use gas chromatography stationary phase (the maximum temperature of 135 ℃, solvent ether). Plasticizer. Solvent.
Product name: Dioctyl adipate/DOA
(2-ethylhexyl) adipate; Dioctyl adipate-2; 2-ethylhexyl dicarboxylic acid; Plastic adjuvant DOA; Dioctyl adipate; (2-ethylhexyl) adipate; di (2-ethylhexyl) adipate;
English name: Bis (2-ethylhexyl) adipate
Bis (2-ethylhexyl) hexanedioate hexanedioic acid bis (2-ethylhexyl) ester (Bis (2-ethylhexyl)) is a synergistic and nonionic surfactant,
CAS: 103-23-1
Molecular formula: C22H42O4
Molecular weight: 370.57
EINECS: 203-090-1
Melting point -67 ° C
The boiling point of 417 ° C
Density 0.925 g / mL at 20 ° C (lit.)
Refractive index n20 / D 1.447 (lit.)
Flash point> 230 ° F
Storage conditions 2-8 ° C
Water - solubility immiscible
BRN 1803774
Stable. Incompatible with oxidizing agents, water, nitrates.
CAS database 103-23-1 (CAS DataBase Reference)
Chemical properties: Colorless or slightly yellow oily liquid. The boiling point of 210 ° C (0.67kPa), 175 ° C (0.27kPa), 167 ℃ (0.130kPa), the relative density of 0.990 (20/4 ℃), the refractive index of 1.4470. A flash point of 193 ° C. Soluble in most organic solvents, slightly soluble in glycol, do not dissolve in water. A special smell.
Uses This product is an excellent cold plasticizer of PVC, giving products excellent low temperature flexibility, and has a certain light and heat stability and water resistance. In the plastisol, the initial viscosity is low, viscosity stability is good. Often used with DOP and other primary plasticizers and for cold-resistant agricultural films, wires, sheet, leather, outdoor water pipes and frozen food packaging film. Also can be used as many low-temperature synthetic rubber plasticizer and nitrocellulose, ethyl cellulose and other resin plasticizer. In the laboratory work for gas chromatography stationary phase. Di-2-ethylhexyl adipate is very toxic and has a lethal dose of about 500,000 mg / kg. The oral LD50 is 3000-6000 mg / kg in rats. The skin and eye irritation is also mild.
Use as a variety of resins, especially polyvinyl chloride and vinyl chloride copolymer cold plasticizer, can also be used as aviation grease raw materials
Use gas chromatography stationary phase (the maximum temperature of 135 ℃, solvent ether). Plasticizer. Solvent.
Product name: Dioctyl adipate/DOA
(2-ethylhexyl) adipate; Dioctyl adipate-2; 2-ethylhexyl dicarboxylic acid; Plastic adjuvant DOA; Dioctyl adipate; (2-ethylhexyl) adipate; di (2-ethylhexyl) adipate;
English name: Bis (2-ethylhexyl) adipate
Bis (2-ethylhexyl) hexanedioate hexanedioic acid bis (2-ethylhexyl) ester (Bis (2-ethylhexyl)) is a synergistic and nonionic surfactant,
CAS: 103-23-1
Molecular formula: C22H42O4
Molecular weight: 370.57
EINECS: 203-090-1
Melting point -67 ° C
The boiling point of 417 ° C
Density 0.925 g / mL at 20 ° C (lit.)
Refractive index n20 / D 1.447 (lit.)
Flash point> 230 ° F
Storage conditions 2-8 ° C
Water - solubility immiscible
BRN 1803774
Stable. Incompatible with oxidizing agents, water, nitrates.
CAS database 103-23-1 (CAS DataBase Reference)
Chemical properties: Colorless or slightly yellow oily liquid. The boiling point of 210 ° C (0.67kPa), 175 ° C (0.27kPa), 167 ℃ (0.130kPa), the relative density of 0.990 (20/4 ℃), the refractive index of 1.4470. A flash point of 193 ° C. Soluble in most organic solvents, slightly soluble in glycol, do not dissolve in water. A special smell.
Uses This product is an excellent cold plasticizer of PVC, giving products excellent low temperature flexibility, and has a certain light and heat stability and water resistance. In the plastisol, the initial viscosity is low, viscosity stability is good. Often used with DOP and other primary plasticizers and for cold-resistant agricultural films, wires, sheet, leather, outdoor water pipes and frozen food packaging film. Also can be used as many low-temperature synthetic rubber plasticizer and nitrocellulose, ethyl cellulose and other resin plasticizer. In the laboratory work for gas chromatography stationary phase. Di-2-ethylhexyl adipate is very toxic and has a lethal dose of about 500,000 mg / kg. The oral LD50 is 3000-6000 mg / kg in rats. The skin and eye irritation is also mild.
Use as a variety of resins, especially polyvinyl chloride and vinyl chloride copolymer cold plasticizer, can also be used as aviation grease raw materials
Use gas chromatography stationary phase (the maximum temperature of 135 ℃, solvent ether). Plasticizer. Solvent.
|
|
|
Privileged suppliers
Last update 2024-04-26
|
details
details