BGC > Product Search > Oleamide | 301-02-0

Molecular Formula : C18H35NO

Content%	98min
Acid value KOHmg/g	0.4max
Iodine value g/100g	75-90
Color gardner	2max
Melting point oC	72-78
Standard	Technical grade
Content	98%
Capacity	500MT/month
Loading port	Shanghai
Use	Oleamide is well used as polyolefins, PVC plastic slip agents, antistatic agents, mold release agents, pigments, dyes and other dispersant, printing ink additives.
Package	25kg/drum or according to the customers’ demand
Storage	Stored in the dry and ventilated inside storeroom, prevent direct sunlight, slightly pile and put down

Content%	98min
Acid value KOHmg/g	0.4max
Iodine value g/100g	75-90
Color gardner	2max
Melting point oC	72-78
Standard	Technical grade
Content	98%
Capacity	500MT/month
Loading port	Shanghai
Use	Oleamide is well used as polyolefins, PVC plastic slip agents, antistatic agents, mold release agents, pigments, dyes and other dispersant, printing ink additives.
Package	25kg/drum or according to the customers’ demand
Storage	Stored in the dry and ventilated inside storeroom, prevent direct sunlight, slightly pile and put down

Content%	98min
Acid value KOHmg/g	0.4max
Iodine value g/100g	75-90
Color gardner	2max
Melting point oC	72-78
Standard	Technical grade
Content	98%
Capacity	500MT/month
Loading port	Shanghai
Use	Oleamide is well used as polyolefins, PVC plastic slip agents, antistatic agents, mold release agents, pigments, dyes and other dispersant, printing ink additives.
Package	25kg/drum or according to the customers’ demand
Storage	Stored in the dry and ventilated inside storeroom, prevent direct sunlight, slightly pile and put down

Molecular Formula: C18H35NO
Molecular Weight: 281.48
Hazard Symbols: Xi
WGKGermany: 1
HS Code: 29241990

Molecular Formula: C18H35NO
Molecular Weight: 281.48
Hazard Symbols: Xi
WGKGermany: 1
HS Code: 29241990

EC No: 206-103-9
Industry: Plastics

Synonyms:
9-Octadecenoic amide; Oleic acid amide; Oleyl amide; Oleylamide; SLEEPAMIDE; ODA; OLEYRAMIDE; OLEYLAMIDE; OLEAMIDE; (9Z)-9-Octadecenamide; (Z)-9-Octadecenamide; 9-Octadecenamide,(Z)-; (9Z)-octadec-9-enamide

EC No: 206-103-9
Industry: Plastics

Synonyms:
9-Octadecenoic amide; Oleic acid amide; Oleyl amide; Oleylamide; SLEEPAMIDE; ODA; OLEYRAMIDE; OLEYLAMIDE; OLEAMIDE; (9Z)-9-Octadecenamide; (Z)-9-Octadecenamide; 9-Octadecenamide,(Z)-; (9Z)-octadec-9-enamide

EC No: 206-103-9
Industry: Plastics

Synonyms:
9-Octadecenoic amide; Oleic acid amide; Oleyl amide; Oleylamide; SLEEPAMIDE; ODA; OLEYRAMIDE; OLEYLAMIDE; OLEAMIDE; (9Z)-9-Octadecenamide; (Z)-9-Octadecenamide; 9-Octadecenamide,(Z)-; (9Z)-octadec-9-enamide

EC No: 206-103-9
Industry: Plastics

Synonyms:
9-Octadecenoic amide; Oleic acid amide; Oleyl amide; Oleylamide; SLEEPAMIDE; ODA; OLEYRAMIDE; OLEYLAMIDE; OLEAMIDE; (9Z)-9-Octadecenamide; (Z)-9-Octadecenamide; 9-Octadecenamide,(Z)-; (9Z)-octadec-9-enamide

EC No: 206-103-9
Industry: Plastics

Synonyms:
9-Octadecenoic amide; Oleic acid amide; Oleyl amide; Oleylamide; SLEEPAMIDE; ODA; OLEYRAMIDE; OLEYLAMIDE; OLEAMIDE; (9Z)-9-Octadecenamide; (Z)-9-Octadecenamide; 9-Octadecenamide,(Z)-; (9Z)-octadec-9-enamide

EC No: 206-103-9
Industry: Plastics

Synonyms:
9-Octadecenoic amide; Oleic acid amide; Oleyl amide; Oleylamide; SLEEPAMIDE; ODA; OLEYRAMIDE; OLEYLAMIDE; OLEAMIDE; (9Z)-9-Octadecenamide; (Z)-9-Octadecenamide; 9-Octadecenamide,(Z)-; (9Z)-octadec-9-enamide

EC No: 206-103-9
Industry: Plastics

Synonyms:
9-Octadecenoic amide; Oleic acid amide; Oleyl amide; Oleylamide; SLEEPAMIDE; ODA; OLEYRAMIDE; OLEYLAMIDE; OLEAMIDE; (9Z)-9-Octadecenamide; (Z)-9-Octadecenamide; 9-Octadecenamide,(Z)-; (9Z)-octadec-9-enamide

EC No: 206-103-9
Industry: Plastics

Synonyms:
9-Octadecenoic amide; Oleic acid amide; Oleyl amide; Oleylamide; SLEEPAMIDE; ODA; OLEYRAMIDE; OLEYLAMIDE; OLEAMIDE; (9Z)-9-Octadecenamide; (Z)-9-Octadecenamide; 9-Octadecenamide,(Z)-; (9Z)-octadec-9-enamide

EC No: 206-103-9
Industry: Plastics

Synonyms:
9-Octadecenoic amide; Oleic acid amide; Oleyl amide; Oleylamide; SLEEPAMIDE; ODA; OLEYRAMIDE; OLEYLAMIDE; OLEAMIDE; (9Z)-9-Octadecenamide; (Z)-9-Octadecenamide; 9-Octadecenamide,(Z)-; (9Z)-octadec-9-enamide

Assay : 98%
Appearance : white powder
Capacity : 2000MT per year
Packaging : 25 kg bags
Sample : available

Assay : 98%
Appearance : white powder
Capacity : 2000MT per year
Packaging : 25 kg bags
Sample : available

Assay : 98%
Appearance : white powder
Capacity : 2000MT per year
Packaging : 25 kg bags
Sample : available

Assay : 98%
Appearance : white powder
Capacity : 2000MT per year
Packaging : 25 kg bags
Sample : available

Assay : 98%
Appearance : white powder
Capacity : 2000MT per year
Packaging : 25 kg bags
Sample : available

Assay : 98%
Appearance : white powder
Capacity : 2000MT per year
Packaging : 25 kg bags
Sample : available

Assay : 98%
Appearance : white powder
Capacity : 2000MT per year
Packaging : 25 kg bags
Sample : available

Assay : 98%
Appearance : white powder
Capacity : 2000MT per year
Packaging : 25 kg bags
Sample : available

Assay : 98%
Appearance : white powder
Capacity : 2000MT per year
Packaging : 25 kg bags
Sample : available

Assay:99.0%min

Assay:99.0%min

Assay:99.0%min

Assay:99.0%min

Smile code:
CCCCCCCC/C=CCCCCCCCC(N)=O
MDL Number:
MFCD00053638
Purity :
65%
Available in stock:
25213 g

Smile code:
CCCCCCCC/C=CCCCCCCCC(N)=O
MDL Number:
MFCD00053638
Purity :
65%
Available in stock:
25213 g

Smile code:
CCCCCCCC/C=CCCCCCCCC(N)=O
MDL Number:
MFCD00053638
Purity :
65%
Available in stock:
25213 g

Smile code:
CCCCCCCC/C=CCCCCCCCC(N)=O
MDL Number:
MFCD00053638
Purity :
65%
Available in stock:
25213 g

Smile code:
CCCCCCCC/C=CCCCCCCCC(N)=O
MDL Number:
MFCD00053638
Purity :
65%
Available in stock:
25213 g

Melting point 70 ° C
Storage conditions -20 ° C
CAS database 301-02-0 (CAS DataBase Reference)
NIST Chemical Substances Information 9-Octadecenamide, (z) - (301-02-0)
EPA Chemical Substance Information 9-Octadecenamide, (9Z) - (301-02-0)


Application and synthesis of oleic acid amide:

Non-ionic surfactants: oleic acid amide is a non-ionic surfactant, also known as 9-octadecyl a dilute amide, oleamide, at room temperature for the white powder or flakes, non-toxic, insoluble in water, soluble In hot ethanol, ether and other organic solvents. Refined by the vegetable oil, with a special internal and external lubrication, heat, oxygen, UV more stable. Anti-static, dispersion and other effects, anti-sticking, anti-sticking, anti-static and dispersion of strong, non-hygroscopicity. Features: anti-adhesive, smooth, smooth, leveling, waterproof, anti-wet, anti-sedimentation. It is mainly used as high-pressure polyethylene (LDPE) film and its composite film, multilayer coextrusion film, gas bead bag, ultra thin film, PVC film, polypropylene (PP), cast polypropylene (EVA), polyoxymethylene (POM), polycarbonate (PC), polyethylene terephthalate (PET), polyethylene terephthalate (PET), polyethylene terephthalate (PET) , Polyamide (PA) and other resin lubricant and release agent; PU surface treatment agent and fiber masterbatch slippery, antistatic agent; plastic table India (composite) ink and PE thermoplastic plastic powder anti-adhesive And leveling agent, smooth brightener; Toner, colorants, masterbatch lubricants and dispersants; functional openings, smooth masterbatch essential fine additives: metal can also be used as protective rib agent and A lubricant for a polyolefin sheet, and the like.

At present, the domestic common lubricant varieties are amide (oleic acid amide and erucic acid amide), soap (calcium stearate, etc.) and silicone (silicone). Silicone is a liquid-like, add the use of inconvenient, and expensive, no professional domestic manufacturers, it is difficult to promote the application. Soap products, although cheap, but the effect is not satisfactory, and add a large amount, in the high-end products can not be used. (0.05% ~ 0.3%), non-toxic (FDA certification), the use of a wide range of applications with a wide range of prospects for the promotion of the use of a variety of agents, .
The addition of 0.05% ~ 0.3% oleic acid amide in the low density polyethylene film material can improve the antistatic and lubricating properties, but also improve the moisture resistance, can significantly reduce the friction coefficient and adhesive resistance, significantly improve the blown film Plastic), can effectively prevent the adhesion between the film and the agglomeration between the particles, and can increase the surface finish film to prevent dust on the surface of the product in the product, to produce a very smooth plastic products.
In the polyolefin cable compound and plastic communication cable material, add oleic acid amide (0.05%), the friction factor can be reduced from 0.70 to 0.16, at the same time can change its coloring, as well as carbon black dispersion to achieve cable particles Material high-speed extrusion, improve the cable sheath tube wall smoothness.
In the polyamide plastic ink add 2-5 oleic acid amide, can improve the printing performance and ink lubricity, and enhance water resistance, enhance the anti-scratch, anti-fouling (due to ink is not dry and caused by the defacement) , Abrasion resistance. In addition, it can improve the ink on the printed surface of the auxiliary development and adhesion, making the print clear, bright color.

Chemical properties are as follows: 1, low-density polyethylene (LDPE) film material must be added chemical additives. 2, or plastic ink modifier. 3, also used as polypropylene (PP), polystyrene (GPPS), phenolic (PF) resin and other lubricants, antistatic agents, anti-caking additives. 4, can be used as polyethylene, polypropylene, synthetic fiber and other concentrated masterbatch and cable (insulation) of the lubricant, from film. 5, used for polypropylene (gasket) pressure, high efficiency heat sealing film and additives. 6, as well as metal preservatives, melamine formaldehyde tableware products, stabilizers, antifreeze additives, lubricants, lubricants and aluminum coating dispersion stabilizer, oil drilling additives.
Uses 1 low-density polyethylene (LDPE) film material must be added chemical additives. 2 or plastic ink modifier. 3 also used as polypropylene (PP); polystyrene (GPPS); phenolic (PF) resin and other lubricants; antistatic agent; anti-caking additives. 4 can be used as polyethylene, polypropylene; synthetic fiber and other concentrated masterbatch and cable (insulation) of the lubricant; 5 for polypropylene (gasket) compression; high-efficiency heat sealing sheet and sealing material additives. 6 and metal protective agent; melamine formaldehyde tableware products, stabilizers; brake lubricants antifreeze additives; paint lubricants and aluminum coating dispersion stabilizer; oil drilling additives.
Uses It can be used as polyolefin, PVC plastic slippery agent, antistatic agent, release agent, pigments, dyes and other dispersants, printing ink additives

Melting point 70 ° C
Storage conditions -20 ° C
CAS database 301-02-0 (CAS DataBase Reference)
NIST Chemical Substances Information 9-Octadecenamide, (z) - (301-02-0)
EPA Chemical Substance Information 9-Octadecenamide, (9Z) - (301-02-0)


Application and synthesis of oleic acid amide:

Non-ionic surfactants: oleic acid amide is a non-ionic surfactant, also known as 9-octadecyl a dilute amide, oleamide, at room temperature for the white powder or flakes, non-toxic, insoluble in water, soluble In hot ethanol, ether and other organic solvents. Refined by the vegetable oil, with a special internal and external lubrication, heat, oxygen, UV more stable. Anti-static, dispersion and other effects, anti-sticking, anti-sticking, anti-static and dispersion of strong, non-hygroscopicity. Features: anti-adhesive, smooth, smooth, leveling, waterproof, anti-wet, anti-sedimentation. It is mainly used as high-pressure polyethylene (LDPE) film and its composite film, multilayer coextrusion film, gas bead bag, ultra thin film, PVC film, polypropylene (PP), cast polypropylene (EVA), polyoxymethylene (POM), polycarbonate (PC), polyethylene terephthalate (PET), polyethylene terephthalate (PET), polyethylene terephthalate (PET) , Polyamide (PA) and other resin lubricant and release agent; PU surface treatment agent and fiber masterbatch slippery, antistatic agent; plastic table India (composite) ink and PE thermoplastic plastic powder anti-adhesive And leveling agent, smooth brightener; Toner, colorants, masterbatch lubricants and dispersants; functional openings, smooth masterbatch essential fine additives: metal can also be used as protective rib agent and A lubricant for a polyolefin sheet, and the like.

At present, the domestic common lubricant varieties are amide (oleic acid amide and erucic acid amide), soap (calcium stearate, etc.) and silicone (silicone). Silicone is a liquid-like, add the use of inconvenient, and expensive, no professional domestic manufacturers, it is difficult to promote the application. Soap products, although cheap, but the effect is not satisfactory, and add a large amount, in the high-end products can not be used. (0.05% ~ 0.3%), non-toxic (FDA certification), the use of a wide range of applications with a wide range of prospects for the promotion of the use of a variety of agents, .
The addition of 0.05% ~ 0.3% oleic acid amide in the low density polyethylene film material can improve the antistatic and lubricating properties, but also improve the moisture resistance, can significantly reduce the friction coefficient and adhesive resistance, significantly improve the blown film Plastic), can effectively prevent the adhesion between the film and the agglomeration between the particles, and can increase the surface finish film to prevent dust on the surface of the product in the product, to produce a very smooth plastic products.
In the polyolefin cable compound and plastic communication cable material, add oleic acid amide (0.05%), the friction factor can be reduced from 0.70 to 0.16, at the same time can change its coloring, as well as carbon black dispersion to achieve cable particles Material high-speed extrusion, improve the cable sheath tube wall smoothness.
In the polyamide plastic ink add 2-5 oleic acid amide, can improve the printing performance and ink lubricity, and enhance water resistance, enhance the anti-scratch, anti-fouling (due to ink is not dry and caused by the defacement) , Abrasion resistance. In addition, it can improve the ink on the printed surface of the auxiliary development and adhesion, making the print clear, bright color.

Chemical properties are as follows: 1, low-density polyethylene (LDPE) film material must be added chemical additives. 2, or plastic ink modifier. 3, also used as polypropylene (PP), polystyrene (GPPS), phenolic (PF) resin and other lubricants, antistatic agents, anti-caking additives. 4, can be used as polyethylene, polypropylene, synthetic fiber and other concentrated masterbatch and cable (insulation) of the lubricant, from film. 5, used for polypropylene (gasket) pressure, high efficiency heat sealing film and additives. 6, as well as metal preservatives, melamine formaldehyde tableware products, stabilizers, antifreeze additives, lubricants, lubricants and aluminum coating dispersion stabilizer, oil drilling additives.
Uses 1 low-density polyethylene (LDPE) film material must be added chemical additives. 2 or plastic ink modifier. 3 also used as polypropylene (PP); polystyrene (GPPS); phenolic (PF) resin and other lubricants; antistatic agent; anti-caking additives. 4 can be used as polyethylene, polypropylene; synthetic fiber and other concentrated masterbatch and cable (insulation) of the lubricant; 5 for polypropylene (gasket) compression; high-efficiency heat sealing sheet and sealing material additives. 6 and metal protective agent; melamine formaldehyde tableware products, stabilizers; brake lubricants antifreeze additives; paint lubricants and aluminum coating dispersion stabilizer; oil drilling additives.
Uses It can be used as polyolefin, PVC plastic slippery agent, antistatic agent, release agent, pigments, dyes and other dispersants, printing ink additives

Melting point 70 ° C
Storage conditions -20 ° C
CAS database 301-02-0 (CAS DataBase Reference)
NIST Chemical Substances Information 9-Octadecenamide, (z) - (301-02-0)
EPA Chemical Substance Information 9-Octadecenamide, (9Z) - (301-02-0)


Application and synthesis of oleic acid amide:

Non-ionic surfactants: oleic acid amide is a non-ionic surfactant, also known as 9-octadecyl a dilute amide, oleamide, at room temperature for the white powder or flakes, non-toxic, insoluble in water, soluble In hot ethanol, ether and other organic solvents. Refined by the vegetable oil, with a special internal and external lubrication, heat, oxygen, UV more stable. Anti-static, dispersion and other effects, anti-sticking, anti-sticking, anti-static and dispersion of strong, non-hygroscopicity. Features: anti-adhesive, smooth, smooth, leveling, waterproof, anti-wet, anti-sedimentation. It is mainly used as high-pressure polyethylene (LDPE) film and its composite film, multilayer coextrusion film, gas bead bag, ultra thin film, PVC film, polypropylene (PP), cast polypropylene (EVA), polyoxymethylene (POM), polycarbonate (PC), polyethylene terephthalate (PET), polyethylene terephthalate (PET), polyethylene terephthalate (PET) , Polyamide (PA) and other resin lubricant and release agent; PU surface treatment agent and fiber masterbatch slippery, antistatic agent; plastic table India (composite) ink and PE thermoplastic plastic powder anti-adhesive And leveling agent, smooth brightener; Toner, colorants, masterbatch lubricants and dispersants; functional openings, smooth masterbatch essential fine additives: metal can also be used as protective rib agent and A lubricant for a polyolefin sheet, and the like.

At present, the domestic common lubricant varieties are amide (oleic acid amide and erucic acid amide), soap (calcium stearate, etc.) and silicone (silicone). Silicone is a liquid-like, add the use of inconvenient, and expensive, no professional domestic manufacturers, it is difficult to promote the application. Soap products, although cheap, but the effect is not satisfactory, and add a large amount, in the high-end products can not be used. (0.05% ~ 0.3%), non-toxic (FDA certification), the use of a wide range of applications with a wide range of prospects for the promotion of the use of a variety of agents, .
The addition of 0.05% ~ 0.3% oleic acid amide in the low density polyethylene film material can improve the antistatic and lubricating properties, but also improve the moisture resistance, can significantly reduce the friction coefficient and adhesive resistance, significantly improve the blown film Plastic), can effectively prevent the adhesion between the film and the agglomeration between the particles, and can increase the surface finish film to prevent dust on the surface of the product in the product, to produce a very smooth plastic products.
In the polyolefin cable compound and plastic communication cable material, add oleic acid amide (0.05%), the friction factor can be reduced from 0.70 to 0.16, at the same time can change its coloring, as well as carbon black dispersion to achieve cable particles Material high-speed extrusion, improve the cable sheath tube wall smoothness.
In the polyamide plastic ink add 2-5 oleic acid amide, can improve the printing performance and ink lubricity, and enhance water resistance, enhance the anti-scratch, anti-fouling (due to ink is not dry and caused by the defacement) , Abrasion resistance. In addition, it can improve the ink on the printed surface of the auxiliary development and adhesion, making the print clear, bright color.

Chemical properties are as follows: 1, low-density polyethylene (LDPE) film material must be added chemical additives. 2, or plastic ink modifier. 3, also used as polypropylene (PP), polystyrene (GPPS), phenolic (PF) resin and other lubricants, antistatic agents, anti-caking additives. 4, can be used as polyethylene, polypropylene, synthetic fiber and other concentrated masterbatch and cable (insulation) of the lubricant, from film. 5, used for polypropylene (gasket) pressure, high efficiency heat sealing film and additives. 6, as well as metal preservatives, melamine formaldehyde tableware products, stabilizers, antifreeze additives, lubricants, lubricants and aluminum coating dispersion stabilizer, oil drilling additives.
Uses 1 low-density polyethylene (LDPE) film material must be added chemical additives. 2 or plastic ink modifier. 3 also used as polypropylene (PP); polystyrene (GPPS); phenolic (PF) resin and other lubricants; antistatic agent; anti-caking additives. 4 can be used as polyethylene, polypropylene; synthetic fiber and other concentrated masterbatch and cable (insulation) of the lubricant; 5 for polypropylene (gasket) compression; high-efficiency heat sealing sheet and sealing material additives. 6 and metal protective agent; melamine formaldehyde tableware products, stabilizers; brake lubricants antifreeze additives; paint lubricants and aluminum coating dispersion stabilizer; oil drilling additives.
Uses It can be used as polyolefin, PVC plastic slippery agent, antistatic agent, release agent, pigments, dyes and other dispersants, printing ink additives

Melting point 70 ° C
Storage conditions -20 ° C
CAS database 301-02-0 (CAS DataBase Reference)
NIST Chemical Substances Information 9-Octadecenamide, (z) - (301-02-0)
EPA Chemical Substance Information 9-Octadecenamide, (9Z) - (301-02-0)


Application and synthesis of oleic acid amide:

Non-ionic surfactants: oleic acid amide is a non-ionic surfactant, also known as 9-octadecyl a dilute amide, oleamide, at room temperature for the white powder or flakes, non-toxic, insoluble in water, soluble In hot ethanol, ether and other organic solvents. Refined by the vegetable oil, with a special internal and external lubrication, heat, oxygen, UV more stable. Anti-static, dispersion and other effects, anti-sticking, anti-sticking, anti-static and dispersion of strong, non-hygroscopicity. Features: anti-adhesive, smooth, smooth, leveling, waterproof, anti-wet, anti-sedimentation. It is mainly used as high-pressure polyethylene (LDPE) film and its composite film, multilayer coextrusion film, gas bead bag, ultra thin film, PVC film, polypropylene (PP), cast polypropylene (EVA), polyoxymethylene (POM), polycarbonate (PC), polyethylene terephthalate (PET), polyethylene terephthalate (PET), polyethylene terephthalate (PET) , Polyamide (PA) and other resin lubricant and release agent; PU surface treatment agent and fiber masterbatch slippery, antistatic agent; plastic table India (composite) ink and PE thermoplastic plastic powder anti-adhesive And leveling agent, smooth brightener; Toner, colorants, masterbatch lubricants and dispersants; functional openings, smooth masterbatch essential fine additives: metal can also be used as protective rib agent and A lubricant for a polyolefin sheet, and the like.

At present, the domestic common lubricant varieties are amide (oleic acid amide and erucic acid amide), soap (calcium stearate, etc.) and silicone (silicone). Silicone is a liquid-like, add the use of inconvenient, and expensive, no professional domestic manufacturers, it is difficult to promote the application. Soap products, although cheap, but the effect is not satisfactory, and add a large amount, in the high-end products can not be used. (0.05% ~ 0.3%), non-toxic (FDA certification), the use of a wide range of applications with a wide range of prospects for the promotion of the use of a variety of agents, .
The addition of 0.05% ~ 0.3% oleic acid amide in the low density polyethylene film material can improve the antistatic and lubricating properties, but also improve the moisture resistance, can significantly reduce the friction coefficient and adhesive resistance, significantly improve the blown film Plastic), can effectively prevent the adhesion between the film and the agglomeration between the particles, and can increase the surface finish film to prevent dust on the surface of the product in the product, to produce a very smooth plastic products.
In the polyolefin cable compound and plastic communication cable material, add oleic acid amide (0.05%), the friction factor can be reduced from 0.70 to 0.16, at the same time can change its coloring, as well as carbon black dispersion to achieve cable particles Material high-speed extrusion, improve the cable sheath tube wall smoothness.
In the polyamide plastic ink add 2-5 oleic acid amide, can improve the printing performance and ink lubricity, and enhance water resistance, enhance the anti-scratch, anti-fouling (due to ink is not dry and caused by the defacement) , Abrasion resistance. In addition, it can improve the ink on the printed surface of the auxiliary development and adhesion, making the print clear, bright color.

Chemical properties are as follows: 1, low-density polyethylene (LDPE) film material must be added chemical additives. 2, or plastic ink modifier. 3, also used as polypropylene (PP), polystyrene (GPPS), phenolic (PF) resin and other lubricants, antistatic agents, anti-caking additives. 4, can be used as polyethylene, polypropylene, synthetic fiber and other concentrated masterbatch and cable (insulation) of the lubricant, from film. 5, used for polypropylene (gasket) pressure, high efficiency heat sealing film and additives. 6, as well as metal preservatives, melamine formaldehyde tableware products, stabilizers, antifreeze additives, lubricants, lubricants and aluminum coating dispersion stabilizer, oil drilling additives.
Uses 1 low-density polyethylene (LDPE) film material must be added chemical additives. 2 or plastic ink modifier. 3 also used as polypropylene (PP); polystyrene (GPPS); phenolic (PF) resin and other lubricants; antistatic agent; anti-caking additives. 4 can be used as polyethylene, polypropylene; synthetic fiber and other concentrated masterbatch and cable (insulation) of the lubricant; 5 for polypropylene (gasket) compression; high-efficiency heat sealing sheet and sealing material additives. 6 and metal protective agent; melamine formaldehyde tableware products, stabilizers; brake lubricants antifreeze additives; paint lubricants and aluminum coating dispersion stabilizer; oil drilling additives.
Uses It can be used as polyolefin, PVC plastic slippery agent, antistatic agent, release agent, pigments, dyes and other dispersants, printing ink additives

Melting point 70 ° C
Storage conditions -20 ° C
CAS database 301-02-0 (CAS DataBase Reference)
NIST Chemical Substances Information 9-Octadecenamide, (z) - (301-02-0)
EPA Chemical Substance Information 9-Octadecenamide, (9Z) - (301-02-0)


Application and synthesis of oleic acid amide:

Non-ionic surfactants: oleic acid amide is a non-ionic surfactant, also known as 9-octadecyl a dilute amide, oleamide, at room temperature for the white powder or flakes, non-toxic, insoluble in water, soluble In hot ethanol, ether and other organic solvents. Refined by the vegetable oil, with a special internal and external lubrication, heat, oxygen, UV more stable. Anti-static, dispersion and other effects, anti-sticking, anti-sticking, anti-static and dispersion of strong, non-hygroscopicity. Features: anti-adhesive, smooth, smooth, leveling, waterproof, anti-wet, anti-sedimentation. It is mainly used as high-pressure polyethylene (LDPE) film and its composite film, multilayer coextrusion film, gas bead bag, ultra thin film, PVC film, polypropylene (PP), cast polypropylene (EVA), polyoxymethylene (POM), polycarbonate (PC), polyethylene terephthalate (PET), polyethylene terephthalate (PET), polyethylene terephthalate (PET) , Polyamide (PA) and other resin lubricant and release agent; PU surface treatment agent and fiber masterbatch slippery, antistatic agent; plastic table India (composite) ink and PE thermoplastic plastic powder anti-adhesive And leveling agent, smooth brightener; Toner, colorants, masterbatch lubricants and dispersants; functional openings, smooth masterbatch essential fine additives: metal can also be used as protective rib agent and A lubricant for a polyolefin sheet, and the like.

At present, the domestic common lubricant varieties are amide (oleic acid amide and erucic acid amide), soap (calcium stearate, etc.) and silicone (silicone). Silicone is a liquid-like, add the use of inconvenient, and expensive, no professional domestic manufacturers, it is difficult to promote the application. Soap products, although cheap, but the effect is not satisfactory, and add a large amount, in the high-end products can not be used. (0.05% ~ 0.3%), non-toxic (FDA certification), the use of a wide range of applications with a wide range of prospects for the promotion of the use of a variety of agents, .
The addition of 0.05% ~ 0.3% oleic acid amide in the low density polyethylene film material can improve the antistatic and lubricating properties, but also improve the moisture resistance, can significantly reduce the friction coefficient and adhesive resistance, significantly improve the blown film Plastic), can effectively prevent the adhesion between the film and the agglomeration between the particles, and can increase the surface finish film to prevent dust on the surface of the product in the product, to produce a very smooth plastic products.
In the polyolefin cable compound and plastic communication cable material, add oleic acid amide (0.05%), the friction factor can be reduced from 0.70 to 0.16, at the same time can change its coloring, as well as carbon black dispersion to achieve cable particles Material high-speed extrusion, improve the cable sheath tube wall smoothness.
In the polyamide plastic ink add 2-5 oleic acid amide, can improve the printing performance and ink lubricity, and enhance water resistance, enhance the anti-scratch, anti-fouling (due to ink is not dry and caused by the defacement) , Abrasion resistance. In addition, it can improve the ink on the printed surface of the auxiliary development and adhesion, making the print clear, bright color.

Chemical properties are as follows: 1, low-density polyethylene (LDPE) film material must be added chemical additives. 2, or plastic ink modifier. 3, also used as polypropylene (PP), polystyrene (GPPS), phenolic (PF) resin and other lubricants, antistatic agents, anti-caking additives. 4, can be used as polyethylene, polypropylene, synthetic fiber and other concentrated masterbatch and cable (insulation) of the lubricant, from film. 5, used for polypropylene (gasket) pressure, high efficiency heat sealing film and additives. 6, as well as metal preservatives, melamine formaldehyde tableware products, stabilizers, antifreeze additives, lubricants, lubricants and aluminum coating dispersion stabilizer, oil drilling additives.
Uses 1 low-density polyethylene (LDPE) film material must be added chemical additives. 2 or plastic ink modifier. 3 also used as polypropylene (PP); polystyrene (GPPS); phenolic (PF) resin and other lubricants; antistatic agent; anti-caking additives. 4 can be used as polyethylene, polypropylene; synthetic fiber and other concentrated masterbatch and cable (insulation) of the lubricant; 5 for polypropylene (gasket) compression; high-efficiency heat sealing sheet and sealing material additives. 6 and metal protective agent; melamine formaldehyde tableware products, stabilizers; brake lubricants antifreeze additives; paint lubricants and aluminum coating dispersion stabilizer; oil drilling additives.
Uses It can be used as polyolefin, PVC plastic slippery agent, antistatic agent, release agent, pigments, dyes and other dispersants, printing ink additives

Melting point 70 ° C
Storage conditions -20 ° C
CAS database 301-02-0 (CAS DataBase Reference)
NIST Chemical Substances Information 9-Octadecenamide, (z) - (301-02-0)
EPA Chemical Substance Information 9-Octadecenamide, (9Z) - (301-02-0)


Application and synthesis of oleic acid amide:

Non-ionic surfactants: oleic acid amide is a non-ionic surfactant, also known as 9-octadecyl a dilute amide, oleamide, at room temperature for the white powder or flakes, non-toxic, insoluble in water, soluble In hot ethanol, ether and other organic solvents. Refined by the vegetable oil, with a special internal and external lubrication, heat, oxygen, UV more stable. Anti-static, dispersion and other effects, anti-sticking, anti-sticking, anti-static and dispersion of strong, non-hygroscopicity. Features: anti-adhesive, smooth, smooth, leveling, waterproof, anti-wet, anti-sedimentation. It is mainly used as high-pressure polyethylene (LDPE) film and its composite film, multilayer coextrusion film, gas bead bag, ultra thin film, PVC film, polypropylene (PP), cast polypropylene (EVA), polyoxymethylene (POM), polycarbonate (PC), polyethylene terephthalate (PET), polyethylene terephthalate (PET), polyethylene terephthalate (PET) , Polyamide (PA) and other resin lubricant and release agent; PU surface treatment agent and fiber masterbatch slippery, antistatic agent; plastic table India (composite) ink and PE thermoplastic plastic powder anti-adhesive And leveling agent, smooth brightener; Toner, colorants, masterbatch lubricants and dispersants; functional openings, smooth masterbatch essential fine additives: metal can also be used as protective rib agent and A lubricant for a polyolefin sheet, and the like.

At present, the domestic common lubricant varieties are amide (oleic acid amide and erucic acid amide), soap (calcium stearate, etc.) and silicone (silicone). Silicone is a liquid-like, add the use of inconvenient, and expensive, no professional domestic manufacturers, it is difficult to promote the application. Soap products, although cheap, but the effect is not satisfactory, and add a large amount, in the high-end products can not be used. (0.05% ~ 0.3%), non-toxic (FDA certification), the use of a wide range of applications with a wide range of prospects for the promotion of the use of a variety of agents, .
The addition of 0.05% ~ 0.3% oleic acid amide in the low density polyethylene film material can improve the antistatic and lubricating properties, but also improve the moisture resistance, can significantly reduce the friction coefficient and adhesive resistance, significantly improve the blown film Plastic), can effectively prevent the adhesion between the film and the agglomeration between the particles, and can increase the surface finish film to prevent dust on the surface of the product in the product, to produce a very smooth plastic products.
In the polyolefin cable compound and plastic communication cable material, add oleic acid amide (0.05%), the friction factor can be reduced from 0.70 to 0.16, at the same time can change its coloring, as well as carbon black dispersion to achieve cable particles Material high-speed extrusion, improve the cable sheath tube wall smoothness.
In the polyamide plastic ink add 2-5 oleic acid amide, can improve the printing performance and ink lubricity, and enhance water resistance, enhance the anti-scratch, anti-fouling (due to ink is not dry and caused by the defacement) , Abrasion resistance. In addition, it can improve the ink on the printed surface of the auxiliary development and adhesion, making the print clear, bright color.

Chemical properties are as follows: 1, low-density polyethylene (LDPE) film material must be added chemical additives. 2, or plastic ink modifier. 3, also used as polypropylene (PP), polystyrene (GPPS), phenolic (PF) resin and other lubricants, antistatic agents, anti-caking additives. 4, can be used as polyethylene, polypropylene, synthetic fiber and other concentrated masterbatch and cable (insulation) of the lubricant, from film. 5, used for polypropylene (gasket) pressure, high efficiency heat sealing film and additives. 6, as well as metal preservatives, melamine formaldehyde tableware products, stabilizers, antifreeze additives, lubricants, lubricants and aluminum coating dispersion stabilizer, oil drilling additives.
Uses 1 low-density polyethylene (LDPE) film material must be added chemical additives. 2 or plastic ink modifier. 3 also used as polypropylene (PP); polystyrene (GPPS); phenolic (PF) resin and other lubricants; antistatic agent; anti-caking additives. 4 can be used as polyethylene, polypropylene; synthetic fiber and other concentrated masterbatch and cable (insulation) of the lubricant; 5 for polypropylene (gasket) compression; high-efficiency heat sealing sheet and sealing material additives. 6 and metal protective agent; melamine formaldehyde tableware products, stabilizers; brake lubricants antifreeze additives; paint lubricants and aluminum coating dispersion stabilizer; oil drilling additives.
Uses It can be used as polyolefin, PVC plastic slippery agent, antistatic agent, release agent, pigments, dyes and other dispersants, printing ink additives