|
|
|
|
Suppliers for
Triphenylbismuth
|
Properties | | CAS |
603-33-8 | | Formula |
C18H15Bi | | EINECS |
210-033-4 |
|
|
17 Registered suppliers
Molecular Formula: C18H15Bi Molecular Weight: 440.29 Hazard Symbols: Xn WGKGermany: 3 HS Code: 29319090
More details are to be found here
Molecular Formula: C18H15Bi Molecular Weight: 440.29 Hazard Symbols: Xn WGKGermany: 3 HS Code: 29319090
More details are to be found here
Molecular Formula: C18H15Bi Molecular Weight: 440.29 Hazard Symbols: Xn WGKGermany: 3 HS Code: 29319090
More details are to be found here
Molecular Formula: C18H15Bi Molecular Weight: 440.29 Hazard Symbols: Xn WGKGermany: 3 HS Code: 29319090
More details are to be found here
Molecular Formula: C18H15Bi Molecular Weight: 440.29 Hazard Symbols: Xn WGKGermany: 3 HS Code: 29319090
More details are to be found here
Molecular Formula: C18H15Bi Molecular Weight: 440.29 Hazard Symbols: Xn WGKGermany: 3 HS Code: 29319090
More details are to be found here
Molecular Formula: C18H15Bi Molecular Weight: 440.29 Hazard Symbols: Xn WGKGermany: 3 HS Code: 29319090
More details are to be found here
Molecular Formula: C18H15Bi Molecular Weight: 440.29 Hazard Symbols: Xn WGKGermany: 3 HS Code: 29319090
More details are to be found here
Product Name: Triphenylbismuth
Synonyms: TRIPHENYLBISMUTH;TRIPHENYLBISMUTHINE;TPB;(C6H5)3Bi;Aerotex;Trifenylbismutin;triphenyl-bismuthin;BISMUTH TRIPHENYL
CAS: 603-33-8
MF: C18H15Bi
MW: 440.29
EINECS: 210-033-4
Product Categories: blocks;BuildingBlocks;Organometallics;organobismuth compound;Furans
Mol File: 603-33-8.mol
Triphenylbismuth Structure
Melting point 78-80 °C
Boiling point 310°C
density 1,585 g/cm3
Fp 242°C/14mm
Water Solubility insoluble
Sensitive Moisture Sensitive
CAS DataBase Reference 603-33-8(CAS DataBase Reference)
NIST Chemistry Reference Bismuthine, triphenyl-(603-33-8)
EPA Substance Registry System Bismuthine, triphenyl-(603-33-8)
Use of high-speed HTP propellant curing propellant, used in the defense industry
| Purity,% | ≥ 97.5
| | Melting point,℃ | ≥ 77.0
| | Bi content.% | 47.0-47.9
| | Insoluble in acetone content,% | ≤ 0.10
| | Mg content,% | ≤ 0.003
| | Total halogen content(in Cl),% | ≤ 0.05
| | Appearance | White or milky crystal, no visible impurities
| | Application | Triphenyl bismuth (TPB) has been used as the curing catalyst of HTPB propellant. TPB could decrease curing temperature and reduce curing time of the propellant, as well as it has no damaging effect on the performance and mechanics properties. The dosage of TPB is 0.006%-0.05% of total weight for the propellant. Curing time is a week in 50℃ . TPB can be also used as the catalyst of the polymerization for ethyne into cyclooctatetraene, formaldehyde, the curing agent for polycyclochlorides, and other monomers etc.
| | Safety instructions | Toxic by ingestion and inhalation. Eye and skin contact can cause inflammation. Operation must be installed with rubber gloves, a respirator and eye protection by wearing protective clothing.
| | Packing | Sealed, hard, cycloidal plastic case. Net weight 500g or 1000g per bottle. Packing can be adjusted according to the clients’ requests.
| | Storage | Stored in a cool, ventilated place. The shelf life is 12 months after manufacturer date. It is still available if retest result is qualified after expire date.
| | Transportation | Should prevent rain drenched, sunning and ultraviolet during transportation. Keep away from strong oxidants. |
| Purity,% | ≥ 97.5
| | Melting point,℃ | ≥ 77.0
| | Bi content.% | 47.0-47.9
| | Insoluble in acetone content,% | ≤ 0.10
| | Mg content,% | ≤ 0.003
| | Total halogen content(in Cl),% | ≤ 0.05
| | Appearance | White or milky crystal, no visible impurities
| | Application | Triphenyl bismuth (TPB) has been used as the curing catalyst of HTPB propellant. TPB could decrease curing temperature and reduce curing time of the propellant, as well as it has no damaging effect on the performance and mechanics properties. The dosage of TPB is 0.006%-0.05% of total weight for the propellant. Curing time is a week in 50℃ . TPB can be also used as the catalyst of the polymerization for ethyne into cyclooctatetraene, formaldehyde, the curing agent for polycyclochlorides, and other monomers etc.
| | Safety instructions | Toxic by ingestion and inhalation. Eye and skin contact can cause inflammation. Operation must be installed with rubber gloves, a respirator and eye protection by wearing protective clothing.
| | Packing | Sealed, hard, cycloidal plastic case. Net weight 500g or 1000g per bottle. Packing can be adjusted according to the clients’ requests.
| | Storage | Stored in a cool, ventilated place. The shelf life is 12 months after manufacturer date. It is still available if retest result is qualified after expire date.
| | Transportation | Should prevent rain drenched, sunning and ultraviolet during transportation. Keep away from strong oxidants. |
| Purity,% | ≥ 97.5
| | Melting point,℃ | ≥ 77.0
| | Bi content.% | 47.0-47.9
| | Insoluble in acetone content,% | ≤ 0.10
| | Mg content,% | ≤ 0.003
| | Total halogen content(in Cl),% | ≤ 0.05
| | Appearance | White or milky crystal, no visible impurities
| | Application | Triphenyl bismuth (TPB) has been used as the curing catalyst of HTPB propellant. TPB could decrease curing temperature and reduce curing time of the propellant, as well as it has no damaging effect on the performance and mechanics properties. The dosage of TPB is 0.006%-0.05% of total weight for the propellant. Curing time is a week in 50℃ . TPB can be also used as the catalyst of the polymerization for ethyne into cyclooctatetraene, formaldehyde, the curing agent for polycyclochlorides, and other monomers etc.
| | Safety instructions | Toxic by ingestion and inhalation. Eye and skin contact can cause inflammation. Operation must be installed with rubber gloves, a respirator and eye protection by wearing protective clothing.
| | Packing | Sealed, hard, cycloidal plastic case. Net weight 500g or 1000g per bottle. Packing can be adjusted according to the clients’ requests.
| | Storage | Stored in a cool, ventilated place. The shelf life is 12 months after manufacturer date. It is still available if retest result is qualified after expire date.
| | Transportation | Should prevent rain drenched, sunning and ultraviolet during transportation. Keep away from strong oxidants. |
|
|
|
Privileged suppliers
Last update 2024-04-26
|
_Co_Ltd_1_575.jpg){kind=logo}
details
details