|
|
Suppliers for
Latamoxef sodium
|
Properties | CAS |
64953-12-4 | Formula |
C20H18N6Na2O9S | EINECS |
265-288-4 |
|
|
8 Registered suppliers
Characters | White powder
| Turbidity of solution | The solution should be clear and colorless; such as turbidity, compared with the 1 turbidity standard solution, may be more concentrated
| Color of Solution | Such as color, with yellow or Green Yellow No. 6 standard color solution(Appendix K A first law), shall not be deeper
| PH | 5.0~7.0
| Water | 5.0%
|
Isomer | In the determination of chromatogram recorded under, latamoxef R isomers and latamoxef isomers of S peak area ratio should be 0.8 ~ 1.4
|
Residual solvent | Ethyl acetate, methyl ethyl ketone, acetone, dichloromethane and methanol by internal standard method by peak area ratio of computing, shall comply with the provisions of.
| Bacterial Endotoxins | Each 1mg latamoxef containing endotoxin content shall be less than 0.050EU
| Assay | On dry basis (C20H20N6Na2O9S) ≥ 830ug/mg
| Turbidity of solution | The solution should be clear and colorless; such as turbidity, compared with the 1 turbidity standard solution, may be more concentrated
| Color of Solution | Such as color, with yellow or Green Yellow No. 6 standard color solution (Appendix K A first law), shall not be deeper
| Insoluble matter | ≤ 0.5%
| Standard | CP and JP standards
| Capacity | 30MT/month
| Loading port | Shanghai
| Use | Latamoxef sodium is used on pharma use.
| Package | 1kg/bag,25kg/drum or according to the customers’ demand
| Storage | Stored in the dry and ventilated inside storeroom, prevent direct sunlight, slightly pile and put down |
Characters | White powder
| Turbidity of solution | The solution should be clear and colorless; such as turbidity, compared with the 1 turbidity standard solution, may be more concentrated
| Color of Solution | Such as color, with yellow or Green Yellow No. 6 standard color solution(Appendix K A first law), shall not be deeper
| PH | 5.0~7.0
| Water | 5.0%
|
Isomer | In the determination of chromatogram recorded under, latamoxef R isomers and latamoxef isomers of S peak area ratio should be 0.8 ~ 1.4
|
Residual solvent | Ethyl acetate, methyl ethyl ketone, acetone, dichloromethane and methanol by internal standard method by peak area ratio of computing, shall comply with the provisions of.
| Bacterial Endotoxins | Each 1mg latamoxef containing endotoxin content shall be less than 0.050EU
| Assay | On dry basis (C20H20N6Na2O9S) ≥ 830ug/mg
| Turbidity of solution | The solution should be clear and colorless; such as turbidity, compared with the 1 turbidity standard solution, may be more concentrated
| Color of Solution | Such as color, with yellow or Green Yellow No. 6 standard color solution (Appendix K A first law), shall not be deeper
| Insoluble matter | ≤ 0.5%
| Standard | CP and JP standards
| Capacity | 30MT/month
| Loading port | Shanghai
| Use | Latamoxef sodium is used on pharma use.
| Package | 1kg/bag,25kg/drum or according to the customers’ demand
| Storage | Stored in the dry and ventilated inside storeroom, prevent direct sunlight, slightly pile and put down |
Molecular Formula: C20H18N6Na2O9S Molecular Weight: 564.44 Hazard Symbols: Xn WGKGermany: 2
More details are to be found here
Molecular Formula: C20H18N6Na2O9S Molecular Weight: 564.44 Hazard Symbols: Xn WGKGermany: 2
More details are to be found here
Molecular Formula: C20H18N6Na2O9S Molecular Weight: 564.44 Hazard Symbols: Xn WGKGermany: 2
More details are to be found here
Molecular Formula: C20H18N6Na2O9S Molecular Weight: 564.44 Hazard Symbols: Xn WGKGermany: 2
More details are to be found here
Molecular Formula: C20H18N6Na2O9S Molecular Weight: 564.44 Hazard Symbols: Xn WGKGermany: 2
More details are to be found here
Molecular Formula: C20H18N6Na2O9S Molecular Weight: 564.44 Hazard Symbols: Xn WGKGermany: 2
More details are to be found here
|
|
|
Privileged suppliers
Last update 2024-05-23
|