|
Suppliers for CAS
9032-42-2
|
Properties | | CAS |
9032-42-2 |
|
|
16 Registered suppliers
Simagchem Corporation
P.R.China
Aecochem Corp.
P.R.China
Dayang Chem (Hangzhou) Co.,Ltd.
P.R.China
Sancai Industry Co.,Ltd.
P.R.China
| Appearance | White or off-white powder
| | Apparent density | 0.25-0.70 g/cm3
| | Actual density | 1.26~1.31g/m3
| | Methoxyl content (%) | 22.0-32.0
| | Substitution degree of Methoxyl | 1.3-2.5
| | Hydroxyethoxy content (%) | 2.0-14
| | Substitution degree of Hydroxyethoxy | 0.06-0.5
| | Gel Temperature | 60-90 °C
| | Carbonization Temperature | 225-230 °C
| | Moisture (%) | 5.0 Max
| | Ash (%) | 0.5 Max
| | PH Value | 4.0-8.0
| | Viscosity (cps) | 4000, 15000, 20000, 40000, 60000, 75000 |
H&Z Industry Co.,Ltd
P.R.China
| Appearance | White or off-white powder
| | Apparent density | 0.25-0.70 g/cm3
| | Actual density | 1.26~1.31g/m3
| | Methoxyl content (%) | 22.0-32.0
| | Substitution degree of Methoxyl | 1.3-2.5
| | Hydroxyethoxy content (%) | 2.0-14
| | Substitution degree of Hydroxyethoxy | 0.06-0.5
| | Gel Temperature | 60-90 °C
| | Carbonization Temperature | 225-230 °C
| | Moisture (%) | 5.0 Max
| | Ash (%) | 0.5 Max
| | PH Value | 4.0-8.0
| | Viscosity (cps) | 4000, 15000, 20000, 40000, 60000, 75000 |
Xingrui Industry Co., Limited
P.R.China
| Appearance | White or off-white powder
| | Apparent density | 0.25-0.70 g/cm3
| | Actual density | 1.26~1.31g/m3
| | Methoxyl content (%) | 22.0-32.0
| | Substitution degree of Methoxyl | 1.3-2.5
| | Hydroxyethoxy content (%) | 2.0-14
| | Substitution degree of Hydroxyethoxy | 0.06-0.5
| | Gel Temperature | 60-90 °C
| | Carbonization Temperature | 225-230 °C
| | Moisture (%) | 5.0 Max
| | Ash (%) | 0.5 Max
| | PH Value | 4.0-8.0
| | Viscosity (cps) | 4000, 15000, 20000, 40000, 60000, 75000 |
Leap Chem Co., Ltd
P.R.China
Molecular Formula: C2H6O2·xCH4O·x WGKGermany: 1 HS Code: 3912 39 85
More details are to be found here
Henan Botai Chemical Building Materials Co. Ltd.
P.R.China
VAMCELL™ HEMC Hydroxy Ethyl Methyl Cellulose
| VAMCELL™ is our registered trademark of Cellulose ethers
| | Product information | Vamcell™ HEMC is one kind of white powder and is odorless and tasteless, produced by the alkalisation of the cellulose being carried out in the presence of liquid methyl chloride and the alkali cellulose being reacted with ethylene oxide. Similar to methyl cellulose while being added to hydroxy ethyl groups, HEMC is more resistant to saline, easily soluble in water and has higher gel temperature.
| | Properties | Good water retention capacity, Improved adhesion and sliding resistance, Developing workability, Prolonging open time, Good wetting ability, Increased mortar yield
| | Appearance | white or off-white powder
| | Methoxyl (%) | 22.0-32.0
| | Gel temperature (℃ ) | 60-90
| | Moisture (%) | 5.0Max
| | Ash (%) | 2.0Max
| | Ph value | 5.0-8.0
| | Package | Packed in 20kg or 25kg paper compound plastic bags
, Stuffed 13MT/20’FCL without pallet, Stuffed 10MT/20’FCL palleted |
Celotech Group
P.R.China
VAMCELL™ HEMC Hydroxy Ethyl Methyl Cellulose
| VAMCELL™ is our registered trademark of Cellulose ethers
| | Product information | Vamcell™ HEMC is one kind of white powder and is odorless and tasteless, produced by the alkalisation of the cellulose being carried out in the presence of liquid methyl chloride and the alkali cellulose being reacted with ethylene oxide. Similar to methyl cellulose while being added to hydroxy ethyl groups, HEMC is more resistant to saline, easily soluble in water and has higher gel temperature.
| | Properties | Good water retention capacity, Improved adhesion and sliding resistance, Developing workability, Prolonging open time, Good wetting ability, Increased mortar yield
| | Appearance | white or off-white powder
| | Methoxyl (%) | 22.0-32.0
| | Gel temperature (℃ ) | 60-90
| | Moisture (%) | 5.0Max
| | Ash (%) | 2.0Max
| | Ph value | 5.0-8.0
| | Package | Packed in 20kg or 25kg paper compound plastic bags
, Stuffed 13MT/20’FCL without pallet, Stuffed 10MT/20’FCL palleted |
Hydroxyethyl methylcellulose provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention, These products, offered under the CELOPRO™ MH brand, are highly effective additives used to improve the quality and processing characteristics of building materials such as plasters and renders, mortars, tile adhesives, joint compounds and emulsion paints.
Product Properties
Constitution: Methyl hydroxy ethyl cellulose
Appearance: White Powder
Substitution degree: Standard etherification
Ionicity: Nonionic
Hydroxyethyl methylcellulose provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention, These products, offered under the CELOPRO™ MH brand, are highly effective additives used to improve the quality and processing characteristics of building materials such as plasters and renders, mortars, tile adhesives, joint compounds and emulsion paints.
Product Properties
Constitution: Methyl hydroxy ethyl cellulose
Appearance: White Powder
Substitution degree: Standard etherification
Ionicity: Nonionic
Chongqing Changfeng Chemical Co. Ltd.
P.R.China
Hydroxyethyl methylcellulose provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention, These products, offered under the CELOPRO™ MH brand, are highly effective additives used to improve the quality and processing characteristics of building materials such as plasters and renders, mortars, tile adhesives, joint compounds and emulsion paints.
Product Properties
Constitution: Methyl hydroxy ethyl cellulose
Appearance: White Powder
Substitution degree: Standard etherification
Ionicity: Nonionic
Hydroxyethyl methylcellulose provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention, These products, offered under the CELOPRO™ MH brand, are highly effective additives used to improve the quality and processing characteristics of building materials such as plasters and renders, mortars, tile adhesives, joint compounds and emulsion paints.
Product Properties
Constitution: Methyl hydroxy ethyl cellulose
Appearance: White Powder
Substitution degree: Standard etherification
Ionicity: Nonionic
Shandong Minglang Chemical Co., Ltd
P.R.China
Hydroxyethyl methylcellulose provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention, These products, offered under the CELOPRO™ MH brand, are highly effective additives used to improve the quality and processing characteristics of building materials such as plasters and renders, mortars, tile adhesives, joint compounds and emulsion paints.
Product Properties
Constitution: Methyl hydroxy ethyl cellulose
Appearance: White Powder
Substitution degree: Standard etherification
Ionicity: Nonionic
Lori Industry Co., Ltd
P.R.China
Hydroxyethyl methylcellulose provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention, These products, offered under the CELOPRO™ MH brand, are highly effective additives used to improve the quality and processing characteristics of building materials such as plasters and renders, mortars, tile adhesives, joint compounds and emulsion paints.
Product Properties
Constitution: Methyl hydroxy ethyl cellulose
Appearance: White Powder
Substitution degree: Standard etherification
Ionicity: Nonionic
Shandong SanYoung Industry Co., Ltd
P.R.China
Appearance： White or off-white powder
Apparent density: 0.25-0.70 g/cm3
Actual density: 1.26~1.31g/m3
Methoxyl content (%): 22.0-32.0
Substitution degree of Methoxyl: 1.3-2.5
Hydroxyethoxy content (%): 2.0-14
Substitution degree of Hydroxyethoxy: 0.06-0.5
Gel Temperature: 60-90 °C
Carbonization Temperature: 225-230 °C
Moisture (%): 5.0 Max
Ash (%): 0.5 Max
PH Value: 4.0-8.0
Viscosity (cps): 4000, 15000, 20000, 40000, 60000, 75000
Xiamen Equation Chemical Co.,Ltd
P.R.China
Appearance： White or off-white powder
Apparent density: 0.25-0.70 g/cm3
Actual density: 1.26~1.31g/m3
Methoxyl content (%): 22.0-32.0
Substitution degree of Methoxyl: 1.3-2.5
Hydroxyethoxy content (%): 2.0-14
Substitution degree of Hydroxyethoxy: 0.06-0.5
Gel Temperature: 60-90 °C
Carbonization Temperature: 225-230 °C
Moisture (%): 5.0 Max
Ash (%): 0.5 Max
PH Value: 4.0-8.0
Viscosity (cps): 4000, 15000, 20000, 40000, 60000, 75000
Chemos GmbH & Co. KG
Germany
Appearance： White or off-white powder
Apparent density: 0.25-0.70 g/cm3
Actual density: 1.26~1.31g/m3
Methoxyl content (%): 22.0-32.0
Substitution degree of Methoxyl: 1.3-2.5
Hydroxyethoxy content (%): 2.0-14
Substitution degree of Hydroxyethoxy: 0.06-0.5
Gel Temperature: 60-90 °C
Carbonization Temperature: 225-230 °C
Moisture (%): 5.0 Max
Ash (%): 0.5 Max
PH Value: 4.0-8.0
Viscosity (cps): 4000, 15000, 20000, 40000, 60000, 75000
BuGuCh & Partners
Germany
Appearance： White or off-white powder
Apparent density: 0.25-0.70 g/cm3
Actual density: 1.26~1.31g/m3
Methoxyl content (%): 22.0-32.0
Substitution degree of Methoxyl: 1.3-2.5
Hydroxyethoxy content (%): 2.0-14
Substitution degree of Hydroxyethoxy: 0.06-0.5
Gel Temperature: 60-90 °C
Carbonization Temperature: 225-230 °C
Moisture (%): 5.0 Max
Ash (%): 0.5 Max
PH Value: 4.0-8.0
Viscosity (cps): 4000, 15000, 20000, 40000, 60000, 75000
|
_Co_Ltd_1_575.jpg){kind=logo}
details
details
details