|
Suppliers for CAS
124-04-9
|
Properties | | CAS |
124-04-9 | | Formula |
C6H10O4 |
|
|
49 Registered suppliers
Simagchem Corporation
P.R.China
Xiamen Hisunny Chemical Co., Ltd.
P.R.China
Molecular Formula : C6H10O4
Aecochem Corp.
P.R.China
Molecular Formula : C6H10O4
Dayang Chem (Hangzhou) Co.,Ltd.
P.R.China
Molecular Formula : C6H10O4
Sancai Industry Co.,Ltd.
P.R.China
| Appearance | White powder
| | Purity | 99.80%
| | Cl- | ≤ 0.0001%
| | Fe3+ | ≤ 0.0001%
| | SO42- | ≤ 0.0003%
| | Heavy metal (Pb2+) | ≤ 0.0002% |
Hangzhou Keying Chem Co., Ltd.
P.R.China
| Appearance | White powder
| | Purity | 99.80%
| | Cl- | ≤ 0.0001%
| | Fe3+ | ≤ 0.0001%
| | SO42- | ≤ 0.0003%
| | Heavy metal (Pb2+) | ≤ 0.0002% |
H&Z Industry Co.,Ltd
P.R.China
| Appearance | White powder
| | Purity | 99.80%
| | Cl- | ≤ 0.0001%
| | Fe3+ | ≤ 0.0001%
| | SO42- | ≤ 0.0003%
| | Heavy metal (Pb2+) | ≤ 0.0002% |
Xingrui Industry Co., Limited
P.R.China
| Appearance | White powder
| | Purity | 99.80%
| | Cl- | ≤ 0.0001%
| | Fe3+ | ≤ 0.0001%
| | SO42- | ≤ 0.0003%
| | Heavy metal (Pb2+) | ≤ 0.0002% |
Hangzhou Meite Industry Co., Ltd (Hangzhou Meite Chemical Co., Ltd)
P.R.China
| Appearance | White powder
| | Purity | 99.80%
| | Cl- | ≤ 0.0001%
| | Fe3+ | ≤ 0.0001%
| | SO42- | ≤ 0.0003%
| | Heavy metal (Pb2+) | ≤ 0.0002% |
Leap Chem Co., Ltd
P.R.China
Molecular Formula: C6H10O4
Molecular Weight: 146.1412
Molecular Formula: C31H63N5O5
Ningbo Jiasi Chemical Co., Ltd.
P.R.China
Molecular Formula: C31H63N5O5
Hädener Rohstoffe GmbH
Switzerland
Molecular Formula: C31H63N5O5
Shanghai Mintchem Development Co., Ltd.
P.R.China
Molecular Formula: C31H63N5O5
ICC Chemical Corporation
USA
Molecular Formula: C31H63N5O5
KHBoddin GmbH
Germany
Molecular Formula: C31H63N5O5
BCH Brühl - Chemikalien Handel GmbH
Germany
Molecular Formula: C31H63N5O5
VMP Chemiekontor GmbH
Germany
Molecular Formula: C31H63N5O5
Hangzhou Verychem Science & Technology Co., Ltd.
P.R.China
Molecular Formula: C31H63N5O5
INNOCHEM
Belgium
Molecular Formula: C31H63N5O5
Refine Chemical Co.,Ltd.
P.R.China
Molecular Formula: C31H63N5O5
U-Chemo Scientific (Shanghai) Co.,Ltd.
P.R.China
Molecular Formula: C31H63N5O5
OPQ Chemical Co., Ltd
P.R.China
Molecular Formula: C31H63N5O5
Create Chemical Co., Ltd.
P.R.China
Molecular Formula: C31H63N5O5
Hangzhou Zhongqi Chem Co., Ltd
P.R.China
Molecular Formula: C31H63N5O5
Nantong Xindao Biotech Ltd
P.R.China
Molecular Formula: C31H63N5O5
Lori Industry Co., Ltd
P.R.China
Molecular Formula: C31H63N5O5
Zehao Industry Co., Ltd.
P.R.China
| Appearance | White crystalline powder
| | Content% (m / m) ≥ | 99.70
| | Melting point C ≥ | 151.5 |
Hangzhou Lingrui Chemical Co., Ltd.
P.R.China
| Appearance | White crystalline powder
| | Content% (m / m) ≥ | 99.70
| | Melting point C ≥ | 151.5 |
Skyrun Industrial Co., Ltd.
P.R.China
| Appearance | White crystalline powder
| | Content% (m / m) ≥ | 99.70
| | Melting point C ≥ | 151.5 |
Shandong SanYoung Industry Co., Ltd
P.R.China
| Appearance | White crystalline powder
| | Content% (m / m) ≥ | 99.70
| | Melting point C ≥ | 151.5 |
Ambeed, Inc.
USA
Purity : 95% Smile code : OC(=O)CCCCC(O)=O MDL Number : MFCD00004420 MolFormula : C6H10O4 MolWeight : 146.1412 Available in stock : 414274.965
More details are to be found here
BLD Pharmatech Ltd
P.R.China
Smile code: OC(=O)CCCCC(O)=O MDL Number: MFCD00004420 Purity : 95% Available in stock: 407634.965 g
More details are to be found here
Xiamen Equation Chemical Co.,Ltd
P.R.China
Smile code: OC(=O)CCCCC(O)=O MDL Number: MFCD00004420 Purity : 95% Available in stock: 407634.965 g
More details are to be found here
AK Scientific, Inc.
USA
Smile code: OC(=O)CCCCC(O)=O MDL Number: MFCD00004420 Purity : 95% Available in stock: 407634.965 g
More details are to be found here
Chemos GmbH & Co. KG
Germany
Smile code: OC(=O)CCCCC(O)=O MDL Number: MFCD00004420 Purity : 95% Available in stock: 407634.965 g
More details are to be found here
BuGuCh & Partners
Germany
Product Name: Adipic acid
Synonyms:
RARECHEM AL BO 0180;AKOS BBS-00004308;ADIPIC ACID;adipinic acid;1,6-HEXANEDIOIC ACID;1,4-BUTANEDICARBOXYLIC ACID;BUTANE-1,4-DICARBOXYLIC ACID;DICARBOXYLIC ACID C6
CAS:124-04-9
MF:C6H10O4
MW:146.14
EINECS:204-673-3
Melting point:151-154 °C(lit.)
Boiling point: 265 °C100 mm Hg(lit.)
Density: 1,36 g/cm3
storage temp. : in R.T.
Stability: Stable. Substances to be avoided include ammonia, strong oxidizing agents.
Package: 25kg/BAG
Purity: 99%
Chemical properties:
White crystals, with scorched bones. Slightly soluble in water, soluble in alcohol, ether and most organic solvents.
Usage:
Mainly used for nylon 66 and engineering plastics raw materials, but also for the production of various ester products, but also for the polyurethane elastomer raw materials
For the synthesis of polymer raw materials, but also for the system of plasticizers and lubricants
Organic synthesis, flux, resin, plastic.
Brief manufacture process:
I Cyclohexane One-step oxidation
Cyclohexane as raw material, acetic acid as solvent, cobalt and bromide as a catalyst, in 2MP. And 90 ° C for 10 ~ 13h. Yield 75%.
2 Cyclohexane step oxidation method
(1) Preparation of KA oil can be 1.0 ~ 2.5MPa and 145 ~ 180 ℃ with air direct oxidation, the yield of 70% to 75%. Can also be used as a catalyst, 1.0 ~ 2.0MPa and 165 ℃ under air oxidation, the yield of 90%, alcohol to ketone ratio of 10: 1; reactants with hot water treatment, ester hydrolysis, stratification, water Layer to recover boric acid, dehydrated into boric acid recycling; organic layer saponified with organic sodium caustic soda, and remove the acid, distillation cyclohexane recovery after alcohol ketone mixture.
(2) Oxidation of KA oil KA oil was oxidized in an excess of 50% to 60% nitric acid in a two-stage series reactor at 60-80C and 0.1-0.4 MPa. The catalyst is copper-vanadium (copper 0.1% to 0.5%, vanadium 0.1% to 0.2%) and the yield is 92% to 96% of the theoretical value. After the reactant is distilled out of nitric acid, the high-purity adipic acid can be obtained by twice crystallization purification.
Product Name: Adipic acid
Synonyms:
RARECHEM AL BO 0180;AKOS BBS-00004308;ADIPIC ACID;adipinic acid;1,6-HEXANEDIOIC ACID;1,4-BUTANEDICARBOXYLIC ACID;BUTANE-1,4-DICARBOXYLIC ACID;DICARBOXYLIC ACID C6
CAS:124-04-9
MF:C6H10O4
MW:146.14
EINECS:204-673-3
Melting point:151-154 °C(lit.)
Boiling point: 265 °C100 mm Hg(lit.)
Density: 1,36 g/cm3
storage temp. : in R.T.
Stability: Stable. Substances to be avoided include ammonia, strong oxidizing agents.
Package: 25kg/BAG
Purity: 99%
Chemical properties:
White crystals, with scorched bones. Slightly soluble in water, soluble in alcohol, ether and most organic solvents.
Usage:
Mainly used for nylon 66 and engineering plastics raw materials, but also for the production of various ester products, but also for the polyurethane elastomer raw materials
For the synthesis of polymer raw materials, but also for the system of plasticizers and lubricants
Organic synthesis, flux, resin, plastic.
Brief manufacture process:
I Cyclohexane One-step oxidation
Cyclohexane as raw material, acetic acid as solvent, cobalt and bromide as a catalyst, in 2MP. And 90 ° C for 10 ~ 13h. Yield 75%.
2 Cyclohexane step oxidation method
(1) Preparation of KA oil can be 1.0 ~ 2.5MPa and 145 ~ 180 ℃ with air direct oxidation, the yield of 70% to 75%. Can also be used as a catalyst, 1.0 ~ 2.0MPa and 165 ℃ under air oxidation, the yield of 90%, alcohol to ketone ratio of 10: 1; reactants with hot water treatment, ester hydrolysis, stratification, water Layer to recover boric acid, dehydrated into boric acid recycling; organic layer saponified with organic sodium caustic soda, and remove the acid, distillation cyclohexane recovery after alcohol ketone mixture.
(2) Oxidation of KA oil KA oil was oxidized in an excess of 50% to 60% nitric acid in a two-stage series reactor at 60-80C and 0.1-0.4 MPa. The catalyst is copper-vanadium (copper 0.1% to 0.5%, vanadium 0.1% to 0.2%) and the yield is 92% to 96% of the theoretical value. After the reactant is distilled out of nitric acid, the high-purity adipic acid can be obtained by twice crystallization purification.
ChemCeed LLC
USA
Product Name: Adipic acid
Synonyms:
RARECHEM AL BO 0180;AKOS BBS-00004308;ADIPIC ACID;adipinic acid;1,6-HEXANEDIOIC ACID;1,4-BUTANEDICARBOXYLIC ACID;BUTANE-1,4-DICARBOXYLIC ACID;DICARBOXYLIC ACID C6
CAS:124-04-9
MF:C6H10O4
MW:146.14
EINECS:204-673-3
Melting point:151-154 °C(lit.)
Boiling point: 265 °C100 mm Hg(lit.)
Density: 1,36 g/cm3
storage temp. : in R.T.
Stability: Stable. Substances to be avoided include ammonia, strong oxidizing agents.
Package: 25kg/BAG
Purity: 99%
Chemical properties:
White crystals, with scorched bones. Slightly soluble in water, soluble in alcohol, ether and most organic solvents.
Usage:
Mainly used for nylon 66 and engineering plastics raw materials, but also for the production of various ester products, but also for the polyurethane elastomer raw materials
For the synthesis of polymer raw materials, but also for the system of plasticizers and lubricants
Organic synthesis, flux, resin, plastic.
Brief manufacture process:
I Cyclohexane One-step oxidation
Cyclohexane as raw material, acetic acid as solvent, cobalt and bromide as a catalyst, in 2MP. And 90 ° C for 10 ~ 13h. Yield 75%.
2 Cyclohexane step oxidation method
(1) Preparation of KA oil can be 1.0 ~ 2.5MPa and 145 ~ 180 ℃ with air direct oxidation, the yield of 70% to 75%. Can also be used as a catalyst, 1.0 ~ 2.0MPa and 165 ℃ under air oxidation, the yield of 90%, alcohol to ketone ratio of 10: 1; reactants with hot water treatment, ester hydrolysis, stratification, water Layer to recover boric acid, dehydrated into boric acid recycling; organic layer saponified with organic sodium caustic soda, and remove the acid, distillation cyclohexane recovery after alcohol ketone mixture.
(2) Oxidation of KA oil KA oil was oxidized in an excess of 50% to 60% nitric acid in a two-stage series reactor at 60-80C and 0.1-0.4 MPa. The catalyst is copper-vanadium (copper 0.1% to 0.5%, vanadium 0.1% to 0.2%) and the yield is 92% to 96% of the theoretical value. After the reactant is distilled out of nitric acid, the high-purity adipic acid can be obtained by twice crystallization purification.
CG Chem. GmbH & Co. KG
Germany
Product Name: Adipic acid
Synonyms:
RARECHEM AL BO 0180;AKOS BBS-00004308;ADIPIC ACID;adipinic acid;1,6-HEXANEDIOIC ACID;1,4-BUTANEDICARBOXYLIC ACID;BUTANE-1,4-DICARBOXYLIC ACID;DICARBOXYLIC ACID C6
CAS:124-04-9
MF:C6H10O4
MW:146.14
EINECS:204-673-3
Melting point:151-154 °C(lit.)
Boiling point: 265 °C100 mm Hg(lit.)
Density: 1,36 g/cm3
storage temp. : in R.T.
Stability: Stable. Substances to be avoided include ammonia, strong oxidizing agents.
Package: 25kg/BAG
Purity: 99%
Chemical properties:
White crystals, with scorched bones. Slightly soluble in water, soluble in alcohol, ether and most organic solvents.
Usage:
Mainly used for nylon 66 and engineering plastics raw materials, but also for the production of various ester products, but also for the polyurethane elastomer raw materials
For the synthesis of polymer raw materials, but also for the system of plasticizers and lubricants
Organic synthesis, flux, resin, plastic.
Brief manufacture process:
I Cyclohexane One-step oxidation
Cyclohexane as raw material, acetic acid as solvent, cobalt and bromide as a catalyst, in 2MP. And 90 ° C for 10 ~ 13h. Yield 75%.
2 Cyclohexane step oxidation method
(1) Preparation of KA oil can be 1.0 ~ 2.5MPa and 145 ~ 180 ℃ with air direct oxidation, the yield of 70% to 75%. Can also be used as a catalyst, 1.0 ~ 2.0MPa and 165 ℃ under air oxidation, the yield of 90%, alcohol to ketone ratio of 10: 1; reactants with hot water treatment, ester hydrolysis, stratification, water Layer to recover boric acid, dehydrated into boric acid recycling; organic layer saponified with organic sodium caustic soda, and remove the acid, distillation cyclohexane recovery after alcohol ketone mixture.
(2) Oxidation of KA oil KA oil was oxidized in an excess of 50% to 60% nitric acid in a two-stage series reactor at 60-80C and 0.1-0.4 MPa. The catalyst is copper-vanadium (copper 0.1% to 0.5%, vanadium 0.1% to 0.2%) and the yield is 92% to 96% of the theoretical value. After the reactant is distilled out of nitric acid, the high-purity adipic acid can be obtained by twice crystallization purification.
ICC Industries B.V
The Netherlands
Product Name: Adipic acid
Synonyms:
RARECHEM AL BO 0180;AKOS BBS-00004308;ADIPIC ACID;adipinic acid;1,6-HEXANEDIOIC ACID;1,4-BUTANEDICARBOXYLIC ACID;BUTANE-1,4-DICARBOXYLIC ACID;DICARBOXYLIC ACID C6
CAS:124-04-9
MF:C6H10O4
MW:146.14
EINECS:204-673-3
Melting point:151-154 °C(lit.)
Boiling point: 265 °C100 mm Hg(lit.)
Density: 1,36 g/cm3
storage temp. : in R.T.
Stability: Stable. Substances to be avoided include ammonia, strong oxidizing agents.
Package: 25kg/BAG
Purity: 99%
Chemical properties:
White crystals, with scorched bones. Slightly soluble in water, soluble in alcohol, ether and most organic solvents.
Usage:
Mainly used for nylon 66 and engineering plastics raw materials, but also for the production of various ester products, but also for the polyurethane elastomer raw materials
For the synthesis of polymer raw materials, but also for the system of plasticizers and lubricants
Organic synthesis, flux, resin, plastic.
Brief manufacture process:
I Cyclohexane One-step oxidation
Cyclohexane as raw material, acetic acid as solvent, cobalt and bromide as a catalyst, in 2MP. And 90 ° C for 10 ~ 13h. Yield 75%.
2 Cyclohexane step oxidation method
(1) Preparation of KA oil can be 1.0 ~ 2.5MPa and 145 ~ 180 ℃ with air direct oxidation, the yield of 70% to 75%. Can also be used as a catalyst, 1.0 ~ 2.0MPa and 165 ℃ under air oxidation, the yield of 90%, alcohol to ketone ratio of 10: 1; reactants with hot water treatment, ester hydrolysis, stratification, water Layer to recover boric acid, dehydrated into boric acid recycling; organic layer saponified with organic sodium caustic soda, and remove the acid, distillation cyclohexane recovery after alcohol ketone mixture.
(2) Oxidation of KA oil KA oil was oxidized in an excess of 50% to 60% nitric acid in a two-stage series reactor at 60-80C and 0.1-0.4 MPa. The catalyst is copper-vanadium (copper 0.1% to 0.5%, vanadium 0.1% to 0.2%) and the yield is 92% to 96% of the theoretical value. After the reactant is distilled out of nitric acid, the high-purity adipic acid can be obtained by twice crystallization purification.
TR International, Inc.
USA
Product Name: Adipic acid
Synonyms:
RARECHEM AL BO 0180;AKOS BBS-00004308;ADIPIC ACID;adipinic acid;1,6-HEXANEDIOIC ACID;1,4-BUTANEDICARBOXYLIC ACID;BUTANE-1,4-DICARBOXYLIC ACID;DICARBOXYLIC ACID C6
CAS:124-04-9
MF:C6H10O4
MW:146.14
EINECS:204-673-3
Melting point:151-154 °C(lit.)
Boiling point: 265 °C100 mm Hg(lit.)
Density: 1,36 g/cm3
storage temp. : in R.T.
Stability: Stable. Substances to be avoided include ammonia, strong oxidizing agents.
Package: 25kg/BAG
Purity: 99%
Chemical properties:
White crystals, with scorched bones. Slightly soluble in water, soluble in alcohol, ether and most organic solvents.
Usage:
Mainly used for nylon 66 and engineering plastics raw materials, but also for the production of various ester products, but also for the polyurethane elastomer raw materials
For the synthesis of polymer raw materials, but also for the system of plasticizers and lubricants
Organic synthesis, flux, resin, plastic.
Brief manufacture process:
I Cyclohexane One-step oxidation
Cyclohexane as raw material, acetic acid as solvent, cobalt and bromide as a catalyst, in 2MP. And 90 ° C for 10 ~ 13h. Yield 75%.
2 Cyclohexane step oxidation method
(1) Preparation of KA oil can be 1.0 ~ 2.5MPa and 145 ~ 180 ℃ with air direct oxidation, the yield of 70% to 75%. Can also be used as a catalyst, 1.0 ~ 2.0MPa and 165 ℃ under air oxidation, the yield of 90%, alcohol to ketone ratio of 10: 1; reactants with hot water treatment, ester hydrolysis, stratification, water Layer to recover boric acid, dehydrated into boric acid recycling; organic layer saponified with organic sodium caustic soda, and remove the acid, distillation cyclohexane recovery after alcohol ketone mixture.
(2) Oxidation of KA oil KA oil was oxidized in an excess of 50% to 60% nitric acid in a two-stage series reactor at 60-80C and 0.1-0.4 MPa. The catalyst is copper-vanadium (copper 0.1% to 0.5%, vanadium 0.1% to 0.2%) and the yield is 92% to 96% of the theoretical value. After the reactant is distilled out of nitric acid, the high-purity adipic acid can be obtained by twice crystallization purification.
Storchem Inc.
Canada
Product Name: Adipic acid
Synonyms:
RARECHEM AL BO 0180;AKOS BBS-00004308;ADIPIC ACID;adipinic acid;1,6-HEXANEDIOIC ACID;1,4-BUTANEDICARBOXYLIC ACID;BUTANE-1,4-DICARBOXYLIC ACID;DICARBOXYLIC ACID C6
CAS:124-04-9
MF:C6H10O4
MW:146.14
EINECS:204-673-3
Melting point:151-154 °C(lit.)
Boiling point: 265 °C100 mm Hg(lit.)
Density: 1,36 g/cm3
storage temp. : in R.T.
Stability: Stable. Substances to be avoided include ammonia, strong oxidizing agents.
Package: 25kg/BAG
Purity: 99%
Chemical properties:
White crystals, with scorched bones. Slightly soluble in water, soluble in alcohol, ether and most organic solvents.
Usage:
Mainly used for nylon 66 and engineering plastics raw materials, but also for the production of various ester products, but also for the polyurethane elastomer raw materials
For the synthesis of polymer raw materials, but also for the system of plasticizers and lubricants
Organic synthesis, flux, resin, plastic.
Brief manufacture process:
I Cyclohexane One-step oxidation
Cyclohexane as raw material, acetic acid as solvent, cobalt and bromide as a catalyst, in 2MP. And 90 ° C for 10 ~ 13h. Yield 75%.
2 Cyclohexane step oxidation method
(1) Preparation of KA oil can be 1.0 ~ 2.5MPa and 145 ~ 180 ℃ with air direct oxidation, the yield of 70% to 75%. Can also be used as a catalyst, 1.0 ~ 2.0MPa and 165 ℃ under air oxidation, the yield of 90%, alcohol to ketone ratio of 10: 1; reactants with hot water treatment, ester hydrolysis, stratification, water Layer to recover boric acid, dehydrated into boric acid recycling; organic layer saponified with organic sodium caustic soda, and remove the acid, distillation cyclohexane recovery after alcohol ketone mixture.
(2) Oxidation of KA oil KA oil was oxidized in an excess of 50% to 60% nitric acid in a two-stage series reactor at 60-80C and 0.1-0.4 MPa. The catalyst is copper-vanadium (copper 0.1% to 0.5%, vanadium 0.1% to 0.2%) and the yield is 92% to 96% of the theoretical value. After the reactant is distilled out of nitric acid, the high-purity adipic acid can be obtained by twice crystallization purification.
Mays Chemical Co., Inc.
USA
Product Name: Adipic acid
Synonyms:
RARECHEM AL BO 0180;AKOS BBS-00004308;ADIPIC ACID;adipinic acid;1,6-HEXANEDIOIC ACID;1,4-BUTANEDICARBOXYLIC ACID;BUTANE-1,4-DICARBOXYLIC ACID;DICARBOXYLIC ACID C6
CAS:124-04-9
MF:C6H10O4
MW:146.14
EINECS:204-673-3
Melting point:151-154 °C(lit.)
Boiling point: 265 °C100 mm Hg(lit.)
Density: 1,36 g/cm3
storage temp. : in R.T.
Stability: Stable. Substances to be avoided include ammonia, strong oxidizing agents.
Package: 25kg/BAG
Purity: 99%
Chemical properties:
White crystals, with scorched bones. Slightly soluble in water, soluble in alcohol, ether and most organic solvents.
Usage:
Mainly used for nylon 66 and engineering plastics raw materials, but also for the production of various ester products, but also for the polyurethane elastomer raw materials
For the synthesis of polymer raw materials, but also for the system of plasticizers and lubricants
Organic synthesis, flux, resin, plastic.
Brief manufacture process:
I Cyclohexane One-step oxidation
Cyclohexane as raw material, acetic acid as solvent, cobalt and bromide as a catalyst, in 2MP. And 90 ° C for 10 ~ 13h. Yield 75%.
2 Cyclohexane step oxidation method
(1) Preparation of KA oil can be 1.0 ~ 2.5MPa and 145 ~ 180 ℃ with air direct oxidation, the yield of 70% to 75%. Can also be used as a catalyst, 1.0 ~ 2.0MPa and 165 ℃ under air oxidation, the yield of 90%, alcohol to ketone ratio of 10: 1; reactants with hot water treatment, ester hydrolysis, stratification, water Layer to recover boric acid, dehydrated into boric acid recycling; organic layer saponified with organic sodium caustic soda, and remove the acid, distillation cyclohexane recovery after alcohol ketone mixture.
(2) Oxidation of KA oil KA oil was oxidized in an excess of 50% to 60% nitric acid in a two-stage series reactor at 60-80C and 0.1-0.4 MPa. The catalyst is copper-vanadium (copper 0.1% to 0.5%, vanadium 0.1% to 0.2%) and the yield is 92% to 96% of the theoretical value. After the reactant is distilled out of nitric acid, the high-purity adipic acid can be obtained by twice crystallization purification.
Magna-Kron Corp.
USA
Product Name: Adipic acid
Synonyms:
RARECHEM AL BO 0180;AKOS BBS-00004308;ADIPIC ACID;adipinic acid;1,6-HEXANEDIOIC ACID;1,4-BUTANEDICARBOXYLIC ACID;BUTANE-1,4-DICARBOXYLIC ACID;DICARBOXYLIC ACID C6
CAS:124-04-9
MF:C6H10O4
MW:146.14
EINECS:204-673-3
Melting point:151-154 °C(lit.)
Boiling point: 265 °C100 mm Hg(lit.)
Density: 1,36 g/cm3
storage temp. : in R.T.
Stability: Stable. Substances to be avoided include ammonia, strong oxidizing agents.
Package: 25kg/BAG
Purity: 99%
Chemical properties:
White crystals, with scorched bones. Slightly soluble in water, soluble in alcohol, ether and most organic solvents.
Usage:
Mainly used for nylon 66 and engineering plastics raw materials, but also for the production of various ester products, but also for the polyurethane elastomer raw materials
For the synthesis of polymer raw materials, but also for the system of plasticizers and lubricants
Organic synthesis, flux, resin, plastic.
Brief manufacture process:
I Cyclohexane One-step oxidation
Cyclohexane as raw material, acetic acid as solvent, cobalt and bromide as a catalyst, in 2MP. And 90 ° C for 10 ~ 13h. Yield 75%.
2 Cyclohexane step oxidation method
(1) Preparation of KA oil can be 1.0 ~ 2.5MPa and 145 ~ 180 ℃ with air direct oxidation, the yield of 70% to 75%. Can also be used as a catalyst, 1.0 ~ 2.0MPa and 165 ℃ under air oxidation, the yield of 90%, alcohol to ketone ratio of 10: 1; reactants with hot water treatment, ester hydrolysis, stratification, water Layer to recover boric acid, dehydrated into boric acid recycling; organic layer saponified with organic sodium caustic soda, and remove the acid, distillation cyclohexane recovery after alcohol ketone mixture.
(2) Oxidation of KA oil KA oil was oxidized in an excess of 50% to 60% nitric acid in a two-stage series reactor at 60-80C and 0.1-0.4 MPa. The catalyst is copper-vanadium (copper 0.1% to 0.5%, vanadium 0.1% to 0.2%) and the yield is 92% to 96% of the theoretical value. After the reactant is distilled out of nitric acid, the high-purity adipic acid can be obtained by twice crystallization purification.
Graham Chemical Corp.
USA
Product Name: Adipic acid
Synonyms:
RARECHEM AL BO 0180;AKOS BBS-00004308;ADIPIC ACID;adipinic acid;1,6-HEXANEDIOIC ACID;1,4-BUTANEDICARBOXYLIC ACID;BUTANE-1,4-DICARBOXYLIC ACID;DICARBOXYLIC ACID C6
CAS:124-04-9
MF:C6H10O4
MW:146.14
EINECS:204-673-3
Melting point:151-154 °C(lit.)
Boiling point: 265 °C100 mm Hg(lit.)
Density: 1,36 g/cm3
storage temp. : in R.T.
Stability: Stable. Substances to be avoided include ammonia, strong oxidizing agents.
Package: 25kg/BAG
Purity: 99%
Chemical properties:
White crystals, with scorched bones. Slightly soluble in water, soluble in alcohol, ether and most organic solvents.
Usage:
Mainly used for nylon 66 and engineering plastics raw materials, but also for the production of various ester products, but also for the polyurethane elastomer raw materials
For the synthesis of polymer raw materials, but also for the system of plasticizers and lubricants
Organic synthesis, flux, resin, plastic.
Brief manufacture process:
I Cyclohexane One-step oxidation
Cyclohexane as raw material, acetic acid as solvent, cobalt and bromide as a catalyst, in 2MP. And 90 ° C for 10 ~ 13h. Yield 75%.
2 Cyclohexane step oxidation method
(1) Preparation of KA oil can be 1.0 ~ 2.5MPa and 145 ~ 180 ℃ with air direct oxidation, the yield of 70% to 75%. Can also be used as a catalyst, 1.0 ~ 2.0MPa and 165 ℃ under air oxidation, the yield of 90%, alcohol to ketone ratio of 10: 1; reactants with hot water treatment, ester hydrolysis, stratification, water Layer to recover boric acid, dehydrated into boric acid recycling; organic layer saponified with organic sodium caustic soda, and remove the acid, distillation cyclohexane recovery after alcohol ketone mixture.
(2) Oxidation of KA oil KA oil was oxidized in an excess of 50% to 60% nitric acid in a two-stage series reactor at 60-80C and 0.1-0.4 MPa. The catalyst is copper-vanadium (copper 0.1% to 0.5%, vanadium 0.1% to 0.2%) and the yield is 92% to 96% of the theoretical value. After the reactant is distilled out of nitric acid, the high-purity adipic acid can be obtained by twice crystallization purification.
Sigma-Aldrich International GmbH
Switzerland
Product Name: Adipic acid
Synonyms:
RARECHEM AL BO 0180;AKOS BBS-00004308;ADIPIC ACID;adipinic acid;1,6-HEXANEDIOIC ACID;1,4-BUTANEDICARBOXYLIC ACID;BUTANE-1,4-DICARBOXYLIC ACID;DICARBOXYLIC ACID C6
CAS:124-04-9
MF:C6H10O4
MW:146.14
EINECS:204-673-3
Melting point:151-154 °C(lit.)
Boiling point: 265 °C100 mm Hg(lit.)
Density: 1,36 g/cm3
storage temp. : in R.T.
Stability: Stable. Substances to be avoided include ammonia, strong oxidizing agents.
Package: 25kg/BAG
Purity: 99%
Chemical properties:
White crystals, with scorched bones. Slightly soluble in water, soluble in alcohol, ether and most organic solvents.
Usage:
Mainly used for nylon 66 and engineering plastics raw materials, but also for the production of various ester products, but also for the polyurethane elastomer raw materials
For the synthesis of polymer raw materials, but also for the system of plasticizers and lubricants
Organic synthesis, flux, resin, plastic.
Brief manufacture process:
I Cyclohexane One-step oxidation
Cyclohexane as raw material, acetic acid as solvent, cobalt and bromide as a catalyst, in 2MP. And 90 ° C for 10 ~ 13h. Yield 75%.
2 Cyclohexane step oxidation method
(1) Preparation of KA oil can be 1.0 ~ 2.5MPa and 145 ~ 180 ℃ with air direct oxidation, the yield of 70% to 75%. Can also be used as a catalyst, 1.0 ~ 2.0MPa and 165 ℃ under air oxidation, the yield of 90%, alcohol to ketone ratio of 10: 1; reactants with hot water treatment, ester hydrolysis, stratification, water Layer to recover boric acid, dehydrated into boric acid recycling; organic layer saponified with organic sodium caustic soda, and remove the acid, distillation cyclohexane recovery after alcohol ketone mixture.
(2) Oxidation of KA oil KA oil was oxidized in an excess of 50% to 60% nitric acid in a two-stage series reactor at 60-80C and 0.1-0.4 MPa. The catalyst is copper-vanadium (copper 0.1% to 0.5%, vanadium 0.1% to 0.2%) and the yield is 92% to 96% of the theoretical value. After the reactant is distilled out of nitric acid, the high-purity adipic acid can be obtained by twice crystallization purification.
DuPont (UK) Ltd.
U.K.
Product Name: Adipic acid
Synonyms:
RARECHEM AL BO 0180;AKOS BBS-00004308;ADIPIC ACID;adipinic acid;1,6-HEXANEDIOIC ACID;1,4-BUTANEDICARBOXYLIC ACID;BUTANE-1,4-DICARBOXYLIC ACID;DICARBOXYLIC ACID C6
CAS:124-04-9
MF:C6H10O4
MW:146.14
EINECS:204-673-3
Melting point:151-154 °C(lit.)
Boiling point: 265 °C100 mm Hg(lit.)
Density: 1,36 g/cm3
storage temp. : in R.T.
Stability: Stable. Substances to be avoided include ammonia, strong oxidizing agents.
Package: 25kg/BAG
Purity: 99%
Chemical properties:
White crystals, with scorched bones. Slightly soluble in water, soluble in alcohol, ether and most organic solvents.
Usage:
Mainly used for nylon 66 and engineering plastics raw materials, but also for the production of various ester products, but also for the polyurethane elastomer raw materials
For the synthesis of polymer raw materials, but also for the system of plasticizers and lubricants
Organic synthesis, flux, resin, plastic.
Brief manufacture process:
I Cyclohexane One-step oxidation
Cyclohexane as raw material, acetic acid as solvent, cobalt and bromide as a catalyst, in 2MP. And 90 ° C for 10 ~ 13h. Yield 75%.
2 Cyclohexane step oxidation method
(1) Preparation of KA oil can be 1.0 ~ 2.5MPa and 145 ~ 180 ℃ with air direct oxidation, the yield of 70% to 75%. Can also be used as a catalyst, 1.0 ~ 2.0MPa and 165 ℃ under air oxidation, the yield of 90%, alcohol to ketone ratio of 10: 1; reactants with hot water treatment, ester hydrolysis, stratification, water Layer to recover boric acid, dehydrated into boric acid recycling; organic layer saponified with organic sodium caustic soda, and remove the acid, distillation cyclohexane recovery after alcohol ketone mixture.
(2) Oxidation of KA oil KA oil was oxidized in an excess of 50% to 60% nitric acid in a two-stage series reactor at 60-80C and 0.1-0.4 MPa. The catalyst is copper-vanadium (copper 0.1% to 0.5%, vanadium 0.1% to 0.2%) and the yield is 92% to 96% of the theoretical value. After the reactant is distilled out of nitric acid, the high-purity adipic acid can be obtained by twice crystallization purification.
OQEMA AG
Germany
Product Name: Adipic acid
Synonyms:
RARECHEM AL BO 0180;AKOS BBS-00004308;ADIPIC ACID;adipinic acid;1,6-HEXANEDIOIC ACID;1,4-BUTANEDICARBOXYLIC ACID;BUTANE-1,4-DICARBOXYLIC ACID;DICARBOXYLIC ACID C6
CAS:124-04-9
MF:C6H10O4
MW:146.14
EINECS:204-673-3
Melting point:151-154 °C(lit.)
Boiling point: 265 °C100 mm Hg(lit.)
Density: 1,36 g/cm3
storage temp. : in R.T.
Stability: Stable. Substances to be avoided include ammonia, strong oxidizing agents.
Package: 25kg/BAG
Purity: 99%
Chemical properties:
White crystals, with scorched bones. Slightly soluble in water, soluble in alcohol, ether and most organic solvents.
Usage:
Mainly used for nylon 66 and engineering plastics raw materials, but also for the production of various ester products, but also for the polyurethane elastomer raw materials
For the synthesis of polymer raw materials, but also for the system of plasticizers and lubricants
Organic synthesis, flux, resin, plastic.
Brief manufacture process:
I Cyclohexane One-step oxidation
Cyclohexane as raw material, acetic acid as solvent, cobalt and bromide as a catalyst, in 2MP. And 90 ° C for 10 ~ 13h. Yield 75%.
2 Cyclohexane step oxidation method
(1) Preparation of KA oil can be 1.0 ~ 2.5MPa and 145 ~ 180 ℃ with air direct oxidation, the yield of 70% to 75%. Can also be used as a catalyst, 1.0 ~ 2.0MPa and 165 ℃ under air oxidation, the yield of 90%, alcohol to ketone ratio of 10: 1; reactants with hot water treatment, ester hydrolysis, stratification, water Layer to recover boric acid, dehydrated into boric acid recycling; organic layer saponified with organic sodium caustic soda, and remove the acid, distillation cyclohexane recovery after alcohol ketone mixture.
(2) Oxidation of KA oil KA oil was oxidized in an excess of 50% to 60% nitric acid in a two-stage series reactor at 60-80C and 0.1-0.4 MPa. The catalyst is copper-vanadium (copper 0.1% to 0.5%, vanadium 0.1% to 0.2%) and the yield is 92% to 96% of the theoretical value. After the reactant is distilled out of nitric acid, the high-purity adipic acid can be obtained by twice crystallization purification.
Merck Schuchardt OHG
Germany
Product Name: Adipic acid
Synonyms:
RARECHEM AL BO 0180;AKOS BBS-00004308;ADIPIC ACID;adipinic acid;1,6-HEXANEDIOIC ACID;1,4-BUTANEDICARBOXYLIC ACID;BUTANE-1,4-DICARBOXYLIC ACID;DICARBOXYLIC ACID C6
CAS:124-04-9
MF:C6H10O4
MW:146.14
EINECS:204-673-3
Melting point:151-154 °C(lit.)
Boiling point: 265 °C100 mm Hg(lit.)
Density: 1,36 g/cm3
storage temp. : in R.T.
Stability: Stable. Substances to be avoided include ammonia, strong oxidizing agents.
Package: 25kg/BAG
Purity: 99%
Chemical properties:
White crystals, with scorched bones. Slightly soluble in water, soluble in alcohol, ether and most organic solvents.
Usage:
Mainly used for nylon 66 and engineering plastics raw materials, but also for the production of various ester products, but also for the polyurethane elastomer raw materials
For the synthesis of polymer raw materials, but also for the system of plasticizers and lubricants
Organic synthesis, flux, resin, plastic.
Brief manufacture process:
I Cyclohexane One-step oxidation
Cyclohexane as raw material, acetic acid as solvent, cobalt and bromide as a catalyst, in 2MP. And 90 ° C for 10 ~ 13h. Yield 75%.
2 Cyclohexane step oxidation method
(1) Preparation of KA oil can be 1.0 ~ 2.5MPa and 145 ~ 180 ℃ with air direct oxidation, the yield of 70% to 75%. Can also be used as a catalyst, 1.0 ~ 2.0MPa and 165 ℃ under air oxidation, the yield of 90%, alcohol to ketone ratio of 10: 1; reactants with hot water treatment, ester hydrolysis, stratification, water Layer to recover boric acid, dehydrated into boric acid recycling; organic layer saponified with organic sodium caustic soda, and remove the acid, distillation cyclohexane recovery after alcohol ketone mixture.
(2) Oxidation of KA oil KA oil was oxidized in an excess of 50% to 60% nitric acid in a two-stage series reactor at 60-80C and 0.1-0.4 MPa. The catalyst is copper-vanadium (copper 0.1% to 0.5%, vanadium 0.1% to 0.2%) and the yield is 92% to 96% of the theoretical value. After the reactant is distilled out of nitric acid, the high-purity adipic acid can be obtained by twice crystallization purification.
Santa Cruz Biotechnology, Inc.
USA
Product Name: Adipic acid
Synonyms:
RARECHEM AL BO 0180;AKOS BBS-00004308;ADIPIC ACID;adipinic acid;1,6-HEXANEDIOIC ACID;1,4-BUTANEDICARBOXYLIC ACID;BUTANE-1,4-DICARBOXYLIC ACID;DICARBOXYLIC ACID C6
CAS:124-04-9
MF:C6H10O4
MW:146.14
EINECS:204-673-3
Melting point:151-154 °C(lit.)
Boiling point: 265 °C100 mm Hg(lit.)
Density: 1,36 g/cm3
storage temp. : in R.T.
Stability: Stable. Substances to be avoided include ammonia, strong oxidizing agents.
Package: 25kg/BAG
Purity: 99%
Chemical properties:
White crystals, with scorched bones. Slightly soluble in water, soluble in alcohol, ether and most organic solvents.
Usage:
Mainly used for nylon 66 and engineering plastics raw materials, but also for the production of various ester products, but also for the polyurethane elastomer raw materials
For the synthesis of polymer raw materials, but also for the system of plasticizers and lubricants
Organic synthesis, flux, resin, plastic.
Brief manufacture process:
I Cyclohexane One-step oxidation
Cyclohexane as raw material, acetic acid as solvent, cobalt and bromide as a catalyst, in 2MP. And 90 ° C for 10 ~ 13h. Yield 75%.
2 Cyclohexane step oxidation method
(1) Preparation of KA oil can be 1.0 ~ 2.5MPa and 145 ~ 180 ℃ with air direct oxidation, the yield of 70% to 75%. Can also be used as a catalyst, 1.0 ~ 2.0MPa and 165 ℃ under air oxidation, the yield of 90%, alcohol to ketone ratio of 10: 1; reactants with hot water treatment, ester hydrolysis, stratification, water Layer to recover boric acid, dehydrated into boric acid recycling; organic layer saponified with organic sodium caustic soda, and remove the acid, distillation cyclohexane recovery after alcohol ketone mixture.
(2) Oxidation of KA oil KA oil was oxidized in an excess of 50% to 60% nitric acid in a two-stage series reactor at 60-80C and 0.1-0.4 MPa. The catalyst is copper-vanadium (copper 0.1% to 0.5%, vanadium 0.1% to 0.2%) and the yield is 92% to 96% of the theoretical value. After the reactant is distilled out of nitric acid, the high-purity adipic acid can be obtained by twice crystallization purification.
|
_Co_Ltd_1_575.jpg){kind=logo}
details
details
details