|
|
Suppliers for
Adipic dihydrazide
|
Properties | CAS |
1071-93-8 | Formula |
C6H14N4O2 | EINECS |
213-999-5 |
|
|
28 Registered suppliers
Appearance | White crystalline powder
| Loss on drying | ≤ 0.50%
| Solubility | Conform
| Melting point | 177.0∽ 185.0
| Assay(HPLC) | ≥ 99.0%
| Standard | Technical grade
| Content | 99%
| Capacity | 100MT/month
| Loading port | Shanghai
| Use | Adipic Dihydrazide can be used in the aggregate-organ of epoxy resin adhesives, epoxy powder coating curing agent, and water-base coatings auxiliaries, metal minus live agents, and other biological agents, and water treatment agent. Special and double acetone acrylamide combination, can be made into high performance water-base coatings.
| Package | 25kg/drum or according to the customers’ demand
| Storage | Stored in the dry and ventilated inside storeroom, prevent direct sunlight, slightly pile and put down |
Appearance | White crystalline powder
| Loss on drying | ≤ 0.50%
| Solubility | Conform
| Melting point | 177.0∽ 185.0
| Assay(HPLC) | ≥ 99.0%
| Standard | Technical grade
| Content | 99%
| Capacity | 100MT/month
| Loading port | Shanghai
| Use | Adipic Dihydrazide can be used in the aggregate-organ of epoxy resin adhesives, epoxy powder coating curing agent, and water-base coatings auxiliaries, metal minus live agents, and other biological agents, and water treatment agent. Special and double acetone acrylamide combination, can be made into high performance water-base coatings.
| Package | 25kg/drum or according to the customers’ demand
| Storage | Stored in the dry and ventilated inside storeroom, prevent direct sunlight, slightly pile and put down |
Appearance | White crystalline powder
| Loss on drying | ≤ 0.50%
| Solubility | Conform
| Melting point | 177.0∽ 185.0
| Assay(HPLC) | ≥ 99.0%
| Standard | Technical grade
| Content | 99%
| Capacity | 100MT/month
| Loading port | Shanghai
| Use | Adipic Dihydrazide can be used in the aggregate-organ of epoxy resin adhesives, epoxy powder coating curing agent, and water-base coatings auxiliaries, metal minus live agents, and other biological agents, and water treatment agent. Special and double acetone acrylamide combination, can be made into high performance water-base coatings.
| Package | 25kg/drum or according to the customers’ demand
| Storage | Stored in the dry and ventilated inside storeroom, prevent direct sunlight, slightly pile and put down |
Appearance | White crystalline powder
| Loss on drying | ≤ 0.50%
| Solubility | Conform
| Melting point | 177.0∽ 185.0
| Assay(HPLC) | ≥ 99.0%
| Standard | Technical grade
| Content | 99%
| Capacity | 100MT/month
| Loading port | Shanghai
| Use | Adipic Dihydrazide can be used in the aggregate-organ of epoxy resin adhesives, epoxy powder coating curing agent, and water-base coatings auxiliaries, metal minus live agents, and other biological agents, and water treatment agent. Special and double acetone acrylamide combination, can be made into high performance water-base coatings.
| Package | 25kg/drum or according to the customers’ demand
| Storage | Stored in the dry and ventilated inside storeroom, prevent direct sunlight, slightly pile and put down |
Molecular Formula: C6H14N4O2 Molecular Weight: 174.2 Hazard Symbols: Xi WGKGermany: 3 HS Code: 29280090
More details are to be found here
Specification
|
| project | standard value
| Exterior | White powder
| melting point °C | 177-183
| content % | ≥ 99.0
| iron % | ≤ 0.0005
| Sulfate % | ≤ 0.003
| chloride % | ≤ 0.005
| loss on drying % | ≤ 0.3 |
Specification
|
| project | standard value
| Exterior | White powder
| melting point °C | 177-183
| content % | ≥ 99.0
| iron % | ≤ 0.0005
| Sulfate % | ≤ 0.003
| chloride % | ≤ 0.005
| loss on drying % | ≤ 0.3 |
Specification
|
| project | standard value
| Exterior | White powder
| melting point °C | 177-183
| content % | ≥ 99.0
| iron % | ≤ 0.0005
| Sulfate % | ≤ 0.003
| chloride % | ≤ 0.005
| loss on drying % | ≤ 0.3 |
Specification
|
| project | standard value
| Exterior | White powder
| melting point °C | 177-183
| content % | ≥ 99.0
| iron % | ≤ 0.0005
| Sulfate % | ≤ 0.003
| chloride % | ≤ 0.005
| loss on drying % | ≤ 0.3 |
Specification
|
| project | standard value
| Exterior | White powder
| melting point °C | 177-183
| content % | ≥ 99.0
| iron % | ≤ 0.0005
| Sulfate % | ≤ 0.003
| chloride % | ≤ 0.005
| loss on drying % | ≤ 0.3 |
Specification
|
| project | standard value
| Exterior | White powder
| melting point °C | 177-183
| content % | ≥ 99.0
| iron % | ≤ 0.0005
| Sulfate % | ≤ 0.003
| chloride % | ≤ 0.005
| loss on drying % | ≤ 0.3 |
Specification
|
| project | standard value
| Exterior | White powder
| melting point °C | 177-183
| content % | ≥ 99.0
| iron % | ≤ 0.0005
| Sulfate % | ≤ 0.003
| chloride % | ≤ 0.005
| loss on drying % | ≤ 0.3 |
Specification
|
| project | standard value
| Exterior | White powder
| melting point °C | 177-183
| content % | ≥ 99.0
| iron % | ≤ 0.0005
| Sulfate % | ≤ 0.003
| chloride % | ≤ 0.005
| loss on drying % | ≤ 0.3 |
Specification
|
| project | standard value
| Exterior | White powder
| melting point °C | 177-183
| content % | ≥ 99.0
| iron % | ≤ 0.0005
| Sulfate % | ≤ 0.003
| chloride % | ≤ 0.005
| loss on drying % | ≤ 0.3 |
Specification
|
| project | standard value
| Exterior | White powder
| melting point °C | 177-183
| content % | ≥ 99.0
| iron % | ≤ 0.0005
| Sulfate % | ≤ 0.003
| chloride % | ≤ 0.005
| loss on drying % | ≤ 0.3 |
Specification
|
| project | standard value
| Exterior | White powder
| melting point °C | 177-183
| content % | ≥ 99.0
| iron % | ≤ 0.0005
| Sulfate % | ≤ 0.003
| chloride % | ≤ 0.005
| loss on drying % | ≤ 0.3 |
Specification
|
| project | standard value
| Exterior | White powder
| melting point °C | 177-183
| content % | ≥ 99.0
| iron % | ≤ 0.0005
| Sulfate % | ≤ 0.003
| chloride % | ≤ 0.005
| loss on drying % | ≤ 0.3 |
Specification
|
| project | standard value
| Exterior | White powder
| melting point °C | 177-183
| content % | ≥ 99.0
| iron % | ≤ 0.0005
| Sulfate % | ≤ 0.003
| chloride % | ≤ 0.005
| loss on drying % | ≤ 0.3 |
Specification
|
| project | standard value
| Exterior | White powder
| melting point °C | 177-183
| content % | ≥ 99.0
| iron % | ≤ 0.0005
| Sulfate % | ≤ 0.003
| chloride % | ≤ 0.005
| loss on drying % | ≤ 0.3 |
Specification
|
| project | standard value
| Exterior | White powder
| melting point °C | 177-183
| content % | ≥ 99.0
| iron % | ≤ 0.0005
| Sulfate % | ≤ 0.003
| chloride % | ≤ 0.005
| loss on drying % | ≤ 0.3 |
Specification
|
| project | standard value
| Exterior | White powder
| melting point °C | 177-183
| content % | ≥ 99.0
| iron % | ≤ 0.0005
| Sulfate % | ≤ 0.003
| chloride % | ≤ 0.005
| loss on drying % | ≤ 0.3 |
Specification
|
| project | standard value
| Exterior | White powder
| melting point °C | 177-183
| content % | ≥ 99.0
| iron % | ≤ 0.0005
| Sulfate % | ≤ 0.003
| chloride % | ≤ 0.005
| loss on drying % | ≤ 0.3 |
Specification
|
| project | standard value
| Exterior | White powder
| melting point °C | 177-183
| content % | ≥ 99.0
| iron % | ≤ 0.0005
| Sulfate % | ≤ 0.003
| chloride % | ≤ 0.005
| loss on drying % | ≤ 0.3 |
Specification
|
| project | standard value
| Exterior | White powder
| melting point °C | 177-183
| content % | ≥ 99.0
| iron % | ≤ 0.0005
| Sulfate % | ≤ 0.003
| chloride % | ≤ 0.005
| loss on drying % | ≤ 0.3 |
Specification
|
| project | standard value
| Exterior | White powder
| melting point °C | 177-183
| content % | ≥ 99.0
| iron % | ≤ 0.0005
| Sulfate % | ≤ 0.003
| chloride % | ≤ 0.005
| loss on drying % | ≤ 0.3 |
Specification
|
| project | standard value
| Exterior | White powder
| melting point °C | 177-183
| content % | ≥ 99.0
| iron % | ≤ 0.0005
| Sulfate % | ≤ 0.003
| chloride % | ≤ 0.005
| loss on drying % | ≤ 0.3 |
|
|
|
Privileged suppliers
Last update 2024-05-23
|