www.BuyersGuideChem.com - the directory of chemicals and chemical suppliers. The search engine opens a large data base and offers new supply sources
Welcome About BGC Terms of Use MSDS Banner Adverts Statistics Impressum Sitemap
BGC > Product Search > Polyvinylpyrrolidone | 9003-39-8
english deutsch español

Suppliers for CAS

9003-39-8


Properties

CAS   9003-39-8 
Formula   (C6H9NO)n 

Structure



42 Registered suppliers


Simagchem Corporation P.R.China
Aecochem Corp. P.R.China
Dayang Chem (Hangzhou) Co.,Ltd. P.R.China
Sancai Industry Co.,Ltd. P.R.China
Hangzhou Keying Chem Co., Ltd. P.R.China
Appearance   A white or almost white powder, odourless or slightly characteristic odour; tasteless; hygroscopic
Solubility   Soluble in water, in ethanol in isopropanol and in chloroform, insoluble in acetone and ether
Identification  
A   IR
B   An organge yellow precipitate is formed
C   A pale blue precipitate is formed
D   A deep red color is produced
E   The substance dissolves
Appearance of solution   Solution S is clear and not more intensely colored than reference solution B6, BY6 or R6
Nitrogen content   11.5-12.8%
Residue on ignition   ≤ 0.1%
Lead   ≤ 10ppm
Aldehydes   ≤ 0.05%
K-valueL   27.0-32.0
Hydrazine   ≤ 1ppm
N-vinyl pyrrolidone   ≤ 0.001%
2-pyrrolidone   ≤ 3.0%
Peroxides   ≤ 400ppm
Formic acid   ≤ 0.5%
PH(50mg/ml in water)   3.0-5.0
Water   ≤ 5.0%
K-Value   27.0-32.4
TAMC   ≤ 1000cfu/g
TYMC   ≤ 100cfu/g
Staphylococcus aureus   Negative
Salmonella   Negative
Pseudomonas aeruginosa   Negative
E.Coli   Negative

Appearance   A white or almost white powder, odourless or slightly characteristic odour; tasteless; hygroscopic
Solubility   Soluble in water, in ethanol in isopropanol and in chloroform, insoluble in acetone and ether
Identification  
A   IR
B   An organge yellow precipitate is formed
C   A pale blue precipitate is formed
D   A deep red color is produced
E   The substance dissolves
Appearance of solution   Solution S is clear and not more intensely colored than reference solution B6, BY6 or R6
Nitrogen content   11.5-12.8%
Residue on ignition   ≤ 0.1%
Lead   ≤ 10ppm
Aldehydes   ≤ 0.05%
K-valueL   27.0-32.0
Hydrazine   ≤ 1ppm
N-vinyl pyrrolidone   ≤ 0.001%
2-pyrrolidone   ≤ 3.0%
Peroxides   ≤ 400ppm
Formic acid   ≤ 0.5%
PH(50mg/ml in water)   3.0-5.0
Water   ≤ 5.0%
K-Value   27.0-32.4
TAMC   ≤ 1000cfu/g
TYMC   ≤ 100cfu/g
Staphylococcus aureus   Negative
Salmonella   Negative
Pseudomonas aeruginosa   Negative
E.Coli   Negative

H&Z Industry Co.,Ltd P.R.China
Xingrui Industry Co., Limited P.R.China
Appearance : A white or almost white powder, odourless or slightly characteristic odour; tasteless; hygroscopic

Identification
A => IR
B => An organge yellow precipitate is formed
C => A pale blue precipitate is formed
D => A deep red color is produced
E => The substance dissolves

Appearance of solution : Solution S is clear and not more intensely colored than reference solution B6, BY6 or R6 | Nitrogen content : 11.5-12.8% | Residue on ignition : ≤ 0.1% | Lead : ≤ 10ppm | Aldehydes : ≤ 0.05% | K-valueL : 27.0-32.0 | Hydrazine : ≤ 1ppm | N-vinyl pyrrolidone : ≤ 0.001% | 2-pyrrolidone : ≤ 3.0% | Peroxides : ≤ 400ppm | Formic acid : ≤ 0.5% | PH(50mg/ml in water) : 3.0-5.0 | Water : ≤ 5.0% | K-Value : 27.0-32.4 | TAMC : ≤ 1000cfu/g | TYMC : ≤ 100cfu/g | Staphylococcus aureus : Negative | Salmonella : Negative | Pseudomonas aeruginosa : Negative | E.Coli : Negative
Hangzhou Meite Industry Co., Ltd (Hangzhou Meite Chemical Co., Ltd) P.R.China
Appearance : A white or almost white powder, odourless or slightly characteristic odour; tasteless; hygroscopic

Identification
A => IR
B => An organge yellow precipitate is formed
C => A pale blue precipitate is formed
D => A deep red color is produced
E => The substance dissolves

Appearance of solution : Solution S is clear and not more intensely colored than reference solution B6, BY6 or R6 | Nitrogen content : 11.5-12.8% | Residue on ignition : ≤ 0.1% | Lead : ≤ 10ppm | Aldehydes : ≤ 0.05% | K-valueL : 27.0-32.0 | Hydrazine : ≤ 1ppm | N-vinyl pyrrolidone : ≤ 0.001% | 2-pyrrolidone : ≤ 3.0% | Peroxides : ≤ 400ppm | Formic acid : ≤ 0.5% | PH(50mg/ml in water) : 3.0-5.0 | Water : ≤ 5.0% | K-Value : 27.0-32.4 | TAMC : ≤ 1000cfu/g | TYMC : ≤ 100cfu/g | Staphylococcus aureus : Negative | Salmonella : Negative | Pseudomonas aeruginosa : Negative | E.Coli : Negative
Capot Chemical Co., Ltd. P.R.China
Leap Chem Co., Ltd P.R.China
Sigma-Aldrich International GmbH Switzerland
Molecular Formula: C18H27N3O3X2
Molecular Weight: 333.43
WGKGermany: 1
More details are to be found here
Yixing TRY New Materials Co.,Ltd. P.R.China
ECSA Chemicals AG Switzerland
QUALITY SPECIFICATION OF PHAR. GRADE (CP2005,USP26,EP4.0)

NAME   K15
K-VALUE   12.8~17.2
Vinylpyrrolidone %   ≤ 0.2
Water %   ≤ 5.0
Residue on ignition %   ≤ 0.1
pH   3.0~7.0
Nitrogen Conten %   11.5~12.8
Aldehydes %   ≤ 0.05
Lead %   ≤ 0.001
Hydrazine PPM   ≤ 1
Peroxide PPM   ≤ 400

NAME   k30
K-VALUE   27.0~32.4
Vinylpyrrolidone %   ≤ 0.2
Water %   ≤ 5.0
Residue on ignition %   ≤ 0.1
pH   3.0~7.0
Nitrogen Conten %   11.5~12.8
Aldehydes %   ≤ 0.05
Lead %   ≤ 0.001
Hydrazine PPM   ≤ 1
Peroxide PPM   ≤ 400

NAME   k90
K-VALUE   81.0~97.2
Vinylpyrrolidone %   ≤ 0.2
Water %   ≤ 5.0
Residue on ignition %   ≤ 0.1
pH   3.0~7.0
Nitrogen Conten %   11.5~12.8
Aldehydes %   ≤ 0.05
Lead %   ≤ 0.001
Hydrazine PPM   ≤ 1
Peroxide PPM   ≤ 400

QUALITY SPECIFICATION OF PHAR. GRADE (CP2005,USP26,EP4.0)

NAME   K15
K-VALUE   12.8~17.2
Vinylpyrrolidone %   ≤ 0.2
Water %   ≤ 5.0
Residue on ignition %   ≤ 0.1
pH   3.0~7.0
Nitrogen Conten %   11.5~12.8
Aldehydes %   ≤ 0.05
Lead %   ≤ 0.001
Hydrazine PPM   ≤ 1
Peroxide PPM   ≤ 400

NAME   k30
K-VALUE   27.0~32.4
Vinylpyrrolidone %   ≤ 0.2
Water %   ≤ 5.0
Residue on ignition %   ≤ 0.1
pH   3.0~7.0
Nitrogen Conten %   11.5~12.8
Aldehydes %   ≤ 0.05
Lead %   ≤ 0.001
Hydrazine PPM   ≤ 1
Peroxide PPM   ≤ 400

NAME   k90
K-VALUE   81.0~97.2
Vinylpyrrolidone %   ≤ 0.2
Water %   ≤ 5.0
Residue on ignition %   ≤ 0.1
pH   3.0~7.0
Nitrogen Conten %   11.5~12.8
Aldehydes %   ≤ 0.05
Lead %   ≤ 0.001
Hydrazine PPM   ≤ 1
Peroxide PPM   ≤ 400

QUALITY SPECIFICATION OF PHAR. GRADE (CP2005,USP26,EP4.0)

NAME   K15
K-VALUE   12.8~17.2
Vinylpyrrolidone %   ≤ 0.2
Water %   ≤ 5.0
Residue on ignition %   ≤ 0.1
pH   3.0~7.0
Nitrogen Conten %   11.5~12.8
Aldehydes %   ≤ 0.05
Lead %   ≤ 0.001
Hydrazine PPM   ≤ 1
Peroxide PPM   ≤ 400

NAME   k30
K-VALUE   27.0~32.4
Vinylpyrrolidone %   ≤ 0.2
Water %   ≤ 5.0
Residue on ignition %   ≤ 0.1
pH   3.0~7.0
Nitrogen Conten %   11.5~12.8
Aldehydes %   ≤ 0.05
Lead %   ≤ 0.001
Hydrazine PPM   ≤ 1
Peroxide PPM   ≤ 400

NAME   k90
K-VALUE   81.0~97.2
Vinylpyrrolidone %   ≤ 0.2
Water %   ≤ 5.0
Residue on ignition %   ≤ 0.1
pH   3.0~7.0
Nitrogen Conten %   11.5~12.8
Aldehydes %   ≤ 0.05
Lead %   ≤ 0.001
Hydrazine PPM   ≤ 1
Peroxide PPM   ≤ 400

Tianjin YR Chemspec Technology Co.,Ltd. P.R.China
Inchem GmbH Germany
Polyvinylpyrrolidone(PVP) are existing as powder and water solution form,and being supplied in a wide molecular weight range,easily dissolve in water,alcohol and other organic solvents,highly hygroscopicity,excellent film-forming capacity,adhesiveness and chemical stability,none toxicity.Cosmetic Grade PVP are widely used in hair care,skin care and oral care products,especially for hair styling products.In view of it’s wide molecular weight range,from the low molecular weight to high molecular weight PVP applicable for soft to hard hair care products’ formulations.

AXO Industry SA Belgium
Polyvinylpyrrolidone(PVP) are existing as powder and water solution form,and being supplied in a wide molecular weight range,easily dissolve in water,alcohol and other organic solvents,highly hygroscopicity,excellent film-forming capacity,adhesiveness and chemical stability,none toxicity.Cosmetic Grade PVP are widely used in hair care,skin care and oral care products,especially for hair styling products.In view of it’s wide molecular weight range,from the low molecular weight to high molecular weight PVP applicable for soft to hard hair care products’ formulations.

Fountain Biotechnology Co.,Ltd P.R.China
Polyvinylpyrrolidone(PVP) are existing as powder and water solution form,and being supplied in a wide molecular weight range,easily dissolve in water,alcohol and other organic solvents,highly hygroscopicity,excellent film-forming capacity,adhesiveness and chemical stability,none toxicity.Cosmetic Grade PVP are widely used in hair care,skin care and oral care products,especially for hair styling products.In view of it’s wide molecular weight range,from the low molecular weight to high molecular weight PVP applicable for soft to hard hair care products’ formulations.

Caesar & Loretz GmbH Germany
Unilong Industry Co.,Ltd P.R.China
Xiamen Kinbester Co., Ltd. P.R.China
MF   C6H9NO
EINECS No.   618-363-4
Appearance   White or yellowish-white powder or flake
Solubility   Soluble in aqueous ethanol (96%) and methanol, slightly soluble in acetone
Peroxide( PPM   94
Ash content( %)   0.03
Aldehyde( PPM)   67
Water content( %)   2.9

X´ian Taicheng Chem Co., Ltd P.R.China
MF   C6H9NO
EINECS No.   618-363-4
Appearance   White or yellowish-white powder or flake
Solubility   Soluble in aqueous ethanol (96%) and methanol, slightly soluble in acetone
Peroxide( PPM   94
Ash content( %)   0.03
Aldehyde( PPM)   67
Water content( %)   2.9

MF   C6H9NO
EINECS No.   618-363-4
Appearance   White or yellowish-white powder or flake
Solubility   Soluble in aqueous ethanol (96%) and methanol, slightly soluble in acetone
Peroxide( PPM   94
Ash content( %)   0.03
Aldehyde( PPM)   67
Water content( %)   2.9

Create Chemical Co., Ltd. P.R.China
MF   C6H9NO
EINECS No.   618-363-4
Appearance   White or yellowish-white powder or flake
Solubility   Soluble in aqueous ethanol (96%) and methanol, slightly soluble in acetone
Peroxide( PPM   94
Ash content( %)   0.03
Aldehyde( PPM)   67
Water content( %)   2.9

Shandong Ench Chemical Co.,Ltd P.R.China
MF   C6H9NO
EINECS No.   618-363-4
Appearance   White or yellowish-white powder or flake
Solubility   Soluble in aqueous ethanol (96%) and methanol, slightly soluble in acetone
Peroxide( PPM   94
Ash content( %)   0.03
Aldehyde( PPM)   67
Water content( %)   2.9

XD BIOCHEMS Ltd P.R.China
MF   C6H9NO
EINECS No.   618-363-4
Appearance   White or yellowish-white powder or flake
Solubility   Soluble in aqueous ethanol (96%) and methanol, slightly soluble in acetone
Peroxide( PPM   94
Ash content( %)   0.03
Aldehyde( PPM)   67
Water content( %)   2.9

JieJie Group Co., Ltd. P.R.China
MF   C6H9NO
EINECS No.   618-363-4
Appearance   White or yellowish-white powder or flake
Solubility   Soluble in aqueous ethanol (96%) and methanol, slightly soluble in acetone
Peroxide( PPM   94
Ash content( %)   0.03
Aldehyde( PPM)   67
Water content( %)   2.9

Krada CPS Industry S.L Spain
MF   C6H9NO
EINECS No.   618-363-4
Appearance   White or yellowish-white powder or flake
Solubility   Soluble in aqueous ethanol (96%) and methanol, slightly soluble in acetone
Peroxide( PPM   94
Ash content( %)   0.03
Aldehyde( PPM)   67
Water content( %)   2.9

MF   C6H9NO
EINECS No.   618-363-4
Appearance   White or yellowish-white powder or flake
Solubility   Soluble in aqueous ethanol (96%) and methanol, slightly soluble in acetone
Peroxide( PPM   94
Ash content( %)   0.03
Aldehyde( PPM)   67
Water content( %)   2.9

Shandong Minglang Chemical Co., Ltd P.R.China
MF   C6H9NO
EINECS No.   618-363-4
Appearance   White or yellowish-white powder or flake
Solubility   Soluble in aqueous ethanol (96%) and methanol, slightly soluble in acetone
Peroxide( PPM   94
Ash content( %)   0.03
Aldehyde( PPM)   67
Water content( %)   2.9

Hangzhou Zhongqi Chem Co., Ltd P.R.China
MF   C6H9NO
EINECS No.   618-363-4
Appearance   White or yellowish-white powder or flake
Solubility   Soluble in aqueous ethanol (96%) and methanol, slightly soluble in acetone
Peroxide( PPM   94
Ash content( %)   0.03
Aldehyde( PPM)   67
Water content( %)   2.9

Nantong Xindao Biotech Ltd P.R.China
MF   C6H9NO
EINECS No.   618-363-4
Appearance   White or yellowish-white powder or flake
Solubility   Soluble in aqueous ethanol (96%) and methanol, slightly soluble in acetone
Peroxide( PPM   94
Ash content( %)   0.03
Aldehyde( PPM)   67
Water content( %)   2.9

Lori Industry Co., Ltd P.R.China
MF   C6H9NO
EINECS No.   618-363-4
Appearance   White or yellowish-white powder or flake
Solubility   Soluble in aqueous ethanol (96%) and methanol, slightly soluble in acetone
Peroxide( PPM   94
Ash content( %)   0.03
Aldehyde( PPM)   67
Water content( %)   2.9

Zehao Industry Co., Ltd. P.R.China
MF   C6H9NO
EINECS No.   618-363-4
Appearance   White or yellowish-white powder or flake
Solubility   Soluble in aqueous ethanol (96%) and methanol, slightly soluble in acetone
Peroxide( PPM   94
Ash content( %)   0.03
Aldehyde( PPM)   67
Water content( %)   2.9

Finetech Industry Limited P.R.China
Hangzhou Lingrui Chemical Co., Ltd. P.R.China

More details are to be found here
Skyrun Industrial Co., Ltd. P.R.China

More details are to be found here
Shandong SanYoung Industry Co., Ltd P.R.China

More details are to be found here
Xiamen Equation Chemical Co.,Ltd P.R.China

More details are to be found here
Chemos GmbH & Co. KG Germany

More details are to be found here
BuGuCh & Partners Germany
Appearance : White or off-white powder
K-value : 27-32.4
Water, % : ≤5.0
Nitrogen content, % : 11.5-12.8
Heavy metal (as Pb), ppm : <10
Ignition residue, % : <0.1
N-Vinylpyrrolidone (Impurity A), % : <0.1
Hydrazine, ppm : <1
Aldehyde, ppm : <500
PH (5% aq) : 3.0-7.0
World. Chem. Co., Ltd. P.R.China
Appearance : White or off-white powder
K-value : 27-32.4
Water, % : ≤5.0
Nitrogen content, % : 11.5-12.8
Heavy metal (as Pb), ppm : <10
Ignition residue, % : <0.1
N-Vinylpyrrolidone (Impurity A), % : <0.1
Hydrazine, ppm : <1
Aldehyde, ppm : <500
PH (5% aq) : 3.0-7.0
LINOSA Ltd. U.K.
Appearance : White or off-white powder
K-value : 27-32.4
Water, % : ≤5.0
Nitrogen content, % : 11.5-12.8
Heavy metal (as Pb), ppm : <10
Ignition residue, % : <0.1
N-Vinylpyrrolidone (Impurity A), % : <0.1
Hydrazine, ppm : <1
Aldehyde, ppm : <500
PH (5% aq) : 3.0-7.0
BASF Belgium S.A. / N.V. Belgium
Appearance : White or off-white powder
K-value : 27-32.4
Water, % : ≤5.0
Nitrogen content, % : 11.5-12.8
Heavy metal (as Pb), ppm : <10
Ignition residue, % : <0.1
N-Vinylpyrrolidone (Impurity A), % : <0.1
Hydrazine, ppm : <1
Aldehyde, ppm : <500
PH (5% aq) : 3.0-7.0
Santa Cruz Biotechnology, Inc. USA
Appearance : White or off-white powder
K-value : 27-32.4
Water, % : ≤5.0
Nitrogen content, % : 11.5-12.8
Heavy metal (as Pb), ppm : <10
Ignition residue, % : <0.1
N-Vinylpyrrolidone (Impurity A), % : <0.1
Hydrazine, ppm : <1
Aldehyde, ppm : <500
PH (5% aq) : 3.0-7.0

Detailed information on the suppliers of Polyvinylpyrrolidone

Properties:

... more properties and specification on Polyvinylpyrrolidone
© Copyright 1996 to 2024 by Netvertise GmbH. All rights reserved