Suppliers for CAS
9004-67-5
|
Properties | CAS |
9004-67-5 | Formula |
[OC5H5(OR)2CH2OR]n R=H or CH3 |
|
|
23 Registered suppliers
Simagchem Corporation
P.R.China
Aecochem Corp.
P.R.China
Dayang Chem (Hangzhou) Co.,Ltd.
P.R.China
H&Z Industry Co.,Ltd
P.R.China
Methoxy | 27.5%-31.5%
| Viscosity | 37500-70000
| Loss on drying | ≤ 5.0%
| Residual on ignition | ≤ 1.5%
| Arsenic | ≤ 3mg/kg
| Lead | ≤ 2mg/kg
| Mercury | ≤ 1mg/kg
| Cadmium | ≤ 1mg/kg |
Xingrui Industry Co., Limited
P.R.China
Leap Chem Co., Ltd
P.R.China
Molecular Formula: C20H38O11 Molecular Weight: 454.50912 WGKGermany: 3 HS Code: 39129000
More details are to be found here
Henan Botai Chemical Building Materials Co. Ltd.
P.R.China
Methyl Cellulose(MC)
| Introduction
| MC is an odorless and tasteless white or slightly yellow powder, it is a water-insoluble natural polymer, but after a chemical process called Etherification, this water-insoluble cellulose is turned into water-soluble nonionic cellulose ether.
| Bulk Density | 0.25-0.7g/cm3
| True Specific Gravity | 1.26-1.31
| Carbonization Temperature | 225-230 ℃
| Specification
| Appearance | White or off-white powders
| Methoxy (%) | 27.0-32.0
| Particle size(through 120mesh) | 85%Min
| Loss on drying (%) | 5.0 Max
| Residue on ignition (%) | 1.5 Max (0.5 Pharma. Grade)
| PH value | 4.0-8.0
| Chloride (%NaCl) | 0.2Max (Pharma. Grade)
| Heavy metals (ppm) | 20Max (Pharma. Grade)
| Arsenic(ppm) | 2 Max (Pharma. Grade)
| Viscosity(mpa.s) | 5-75,000
| Properties
| Good water retention Adjusting consistence Developing workability Prolonging open time Increasing the adhesion Stability
| Package
| 20kg net paper bags with PE inner liner 500kg jumbo bags with PE inner liner. On clients’ requirement
| Storage
| It should be stored under dry and clean conditions and away from heat and direct sunlight, stored in sealed and original package and avoid humidity due to its hygroscopic properties. |
Celotech Group
P.R.China
Celopro® MT is a brand new product that are especially designed of methylcellulose derivatives, including hydroxypropyl methylcellulose and methyhydroxy ethylcellulose, straight or modified with organic and inorganic additives.
These series have been developed to improve the application and strength properties of gypsum based plasters, fillers, adhesives and spackling compounds, cement and lime based plasters, tile cements and similar products.
Ronas Chemicals Ind. Co., Ltd.
P.R.China
NFPARo: 1-30
HS code: 3912.9000
AXO Industry SA
Belgium
Caesar & Loretz GmbH
Germany
OPQ Chemical Co., Ltd
P.R.China
Create Chemical Co., Ltd.
P.R.China
Shandong Lanhai Industry Co.,Ltd.
P.R.China
Hangzhou Zhongqi Chem Co., Ltd
P.R.China
Lori Industry Co., Ltd
P.R.China
Zehao Industry Co., Ltd.
P.R.China
Skyrun Industrial Co., Ltd.
P.R.China
Xiamen Equation Chemical Co.,Ltd
P.R.China
AK Scientific, Inc.
USA
Chemos GmbH & Co. KG
Germany
Chemcolloids Ltd.
U.K.
Mays Chemical Co., Inc.
USA
Detailed information on the suppliers of
|